Grundfos 97653260 - CR 32-4-2 H-G22-A-E-HQQE | Horizontal | End Suction

Save $6,260.36
GrundfosSKU: 97653260

Price:
Sale price$8,366.64 Regular price$14,627.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CR 32-4-2 H-G22-A-E-HQQE · Vertical Multistage Centrifugal Pump
CR15HP208-230/460V3-Phase60 HzNEMA Premium / IE3 60HzTEFCStainless steel

The Grundfos 97653260 (CR 32-4-2 H-G22-A-E-HQQE) is a Vertical Multistage Centrifugal Pump. Cast iron head and base, stainless steel wetted parts. Used in water supply, pressure boosting, HVAC, and industrial liquid transfer. Nominal performance: 136US gpm at 274.9ft. Rated 208-230/460V, 3-Phase, 60 Hz.

Power
15HP
Voltage
208-230/460V
Phase
3-Phase
Max Flow
136US gpm
Max Head
274.9ft
Max Pressure
232.06psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
NEMA Premium / IE3 60Hz motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Vertical Multistage Design

Multiple stages in series deliver high head at compact footprint. CR handles up to 60 bar and flow ranges from 0.5 to 900 m³/h across the series range.

Stainless Steel Wetted Parts

All parts in contact with the pumped fluid are stainless steel — impeller, shaft, chamber. Cast iron is used only for the head and base which never contact the fluid.

QuickTight Connection System

No special tools needed for coupling. Integrated coupling design reduces installation and service time.

Wide Configuration Range

Available in 60+ frame sizes and 16 impeller variants. CR can be configured for almost any pressure/flow combination in commercial and industrial water systems.

Authorized Grundfos Distributor

PumpStop supplies genuine Grundfos CR pumps with full manufacturer warranty and factory-trained technical support.

Contact PumpStop for Sizing

The CR family covers a wide operating range. Contact PumpStop to confirm the correct model, voltage, and frequency for your system.

Model Information — CR 32-4-2 H-G22-A-E-HQQE
Series: CR
Model Code: CR 32-4-2 H-G22-A-E-HQQE
Seal Type: Cartridge seal — H rubber bellows, QQ SiC/SiC faces, E EPDM O-ring
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal: HQQE
Flange Rating: PN 16
Technical Specifications
Model Number 97653260
Product Series CR
Series Description Vertical Multistage Centrifugal Pump
Power 15HP
Voltage 208-230/460V
Phase 3-Phase
Frequency 60 Hz
Motor Speed 3510rpm
Pump Speed 3444rpm
Full Load Current 38,0-35,0/17,5A
Motor Type BALDOR
Motor Efficiency Class NEMA Premium / IE3 60Hz
Motor Efficiency 91.0%
Insulation Class F
Protection Class (IP) TEFC
Nominal Flow 136US gpm
Nominal Head 274.9ft
Max Operating Pressure 232.06psi
Max Fluid Temperature 248°F
Max Ambient Temperature 104°F
Inlet Connection 2inch
Outlet Connection 2inch
Pipe Pressure Rating PN 16
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal HQQE
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 208-230/460V, 3-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 248°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. CR pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CR Series
✓ Product Data Sheet — CR 32-4-2 H-G22-A-E-HQQE
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
Approvals on nameplate CURUS,NSF/ANSI 61
Bearing 1 Graflon
Built-in motor protection NONE
Code for rubber E
Code for shaft seal HQQE
Connect code G22
Connection PN 16
Cooling TEFC
Curve tolerance ISO9906:2012 3B
Flange rating inlet 150 lb
Flange size for motor 254TC
Frequency 60 Hz
Frequency converter NONE
Gross weight 446.0 lb
IE Eff. Class NEMA Premium / IE3 60Hz
IE efficiency Product name:CR 32-4-2 H-G22-A-E-HQQE
IE Efficiency class NEMA Premium / IE3 60Hz
Impeller Stainless steel
Impellers 2
Insulation F
Insulation class (IEC 85) F
Liquid max temp 248°F
Liquid temperature range -22 .. 248 °F
Low NPSH N
Material code A
Maximum ambient temperature 104 °F
Maximum head 320.6 ft
Maximum operating pressure 232.06 psi
Model B
Motor 254TC
Motor efficiency at full load 1 0.91
Motor standard NEMA
Motor type BALDOR
n rpm F
Net weight 328.0 lb
Number of poles 2
Number of reduced-diameter impellers 2
P2 kW 15 HP
Phase 3
Power (P2) required by pump 15 HP
Pressure rating for connection PN 16
Pressure sensor N
Pump 15 HP
Pump version H
Rated current 38,0-35,0/17,5 A
Rated flow 136 US gpm
Rated head 274.9 ft
Rated power - P2 15 HP
Rated speed 3510 rpm
Rated voltage 3 x 208-230/460 V
Rubber E
Sales region USA
Service factor 1.15
Shaft Product name:CR 32-4-2 H-G22-A-E-HQQE
Shaft seal HQQE
Stages 4
Standard NEMA
Support bearing Graflon
Type BALDOR
Version H

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products