Liberty Motor XLE50 208/230V, Single Phase, 4 Pole (34230B0)

This item ships free!
LibertySKU: 34230B0

Contact for price
or Call for most up to date lead times. (781) 281-8905

Description

Liberty Pumps — A Family and Employee Owned Company · Bergen, New York · Since 1965
Model 34230B0 · XLE50 · Explosion Proof / Hazardous Location
1/2 HP208/230VExplosion Proof / Hazardous LocationSewage Pumps3-Year Warranty

The Liberty Pumps 34230B0 is a 1/2 HP, 208/230V, 1-Phase motor xle50 208/230v, single phase, 4 pole. Liberty Pumps XLE50-Series cast iron sewage pump is an explosion-proof pump for use in hazardous locations. It is Class 1, Division 1 Groups C & D and Class 1, Zone 1 and Group IIA and IIB certified. Providing a dual 2" or 3" discharge, 2" solids handling, and 2 vane semi-open ca

Horsepower
1/2 HP
Voltage
208/230V
Discharge
3""
Solids Handling
2" dia.
UL Class I Div 1
UL listed for hazardous locations — safe for flammable vapors and gases
1/2 HP — Residential Grade
Thermal overload protection — motor automatically resets after cooling, preventing burnout
Authorized Dealer
PumpStop is an authorized Liberty Pumps distributor — full warranty coverage
Expert Support
Technical specialists available — call (781) 281-8905 or chat
Why This Product

Sewage / Effluent Design — Handles Raw Waste

Sewage pump construction handles raw sewage, biological waste, and solids in residential septic and municipal lift station applications. Impeller clearances and casing geometry are sized for sewage solids passage.

2" Solids Handling

2" spherical solids handling capability allows the pump to pass tissue, sanitary products, and other residential sewage materials without clogging — the minimum recommended for residential sewage applications.

Cast Iron Construction — Long Service Life

Cast iron casing and impeller provide the wear resistance required for continuous sewage pumping. Cast iron is the industry standard for sewage pump construction — thermoplastic construction is not recommended for primary sewage service.

Thermal Overload — Continuous Duty Rated

Motor is rated for continuous duty operation with built-in thermal overload protection. Sewage pumps must handle demand spikes from simultaneous fixture usage without motor failure.

NEMA 6 Submersible Rating

Rated for continuous submersible operation to NEMA 6 standards — sealed motor, oil-filled for thermal management, and hermetically sealed bearing housings for long submerged service life.

Liberty Pumps Quality

Manufactured in Bergen, New York with a 3-year limited warranty. Liberty Pumps sewage pump products are used in residential, commercial, and light municipal applications across North America.

Technical Specifications
Model Number 34230B0
Series XLE50
Category Explosion Proof / Hazardous Location
Horsepower 1/2 HP
Voltage 208/230V
Phase 1-Phase
Discharge Size 3""
Solids Handling 2"
Key Features
Heavy cast iron construction
Dual shaft seals
Seal fail sensor
2 Vane, semi-open cast iron impeller (bronze optional)
1 -1/2" Threads provided at power cords for optional conduit connection For use with ISS-Series and
Important Notices
Electrical Requires a properly grounded GFCI receptacle meeting UL 943 requirements. Do not use an extension cord.
Fluid compatibility For use with clean water and gray water only. Not for use with chemicals, flammable fluids, grease, hydrocarbons, sand, cement, or abrasives.
Warranty 3-year Liberty Pumps limited warranty from date of purchase. Warranty voids for use with prohibited substances or field disassembly beyond normal maintenance.
Available Documentation
✓ Sales Literature / Product Brochure
✓ Installation Manual
✓ Engineering Specification Sheet
Need the installation manual, spec sheet, or product brochure? Contact PumpStop and we'll send it over.
Before You OrderConfirm voltage and switch type are correct for your installation. For sizing and compatibility guidance, chat or call (781) 281-8905.

Motor Curves

Recently viewed

Similar Products