Description
The AMT H03/4A4-36DK pumps oscillating hand pump h03/4a4-36dk. Self-primes to 3 Ft. without a foot valve. the fluid source to the pump. Avoid using loops or sections pumped through the unit. Although this pump is suitable for of pipe or fittings which might permit air to become trapped. many liquids, it is not suitable for all liquids!
Direct Drum Transfer — No Decanting Required
Drum pump design transfers liquid directly from 55-gallon drums and totes without tilting, pouring, or manual handling. The pump tube submerges in the drum and pulls from the bottom — maximizing product recovery and minimizing manual handling.
Multiple Fluid Tube Options
Polypropylene, stainless steel, and PVDF pump tube options cover compatibility from water and mild chemicals to concentrated acids, solvents, and aggressive process fluids. Select the tube material matched to your fluid.
Portable Operation
Portable pump and tube assembly transfers between drums without tools — insert the tube, connect the outlet hose, and start pumping. One pump serves multiple containers throughout the facility.
Stainless Steel Construction Option
Stainless steel tube and wetted parts for pharmaceutical, food-grade, and high-purity chemical transfer where contamination from plastic or non-stainless metals is unacceptable.
Electric Drive — Consistent Flow Rate
Electric motor provides consistent flow rate regardless of operator fatigue — unlike hand pumps where output varies with operator effort. Suitable for high-volume drum dispensing operations.
ATEX-Compatible Options
Available in configurations for use with flammable liquids where ignition risk from static discharge or electrical arcing must be controlled. Consult AMT for explosion-proof and ATEX-rated configurations.
| Model Number | H03/4A4-36DK |
| Series | Piston Drum and Hand Diaphragm |
| Category | Drum Pumps |
| Max Working Pressure | 50 PSI |
| Max Temperature | 130° F |
| Self-Prime Lift | 3 Ft. |
| Max Working Pressure | 50 PSI |
| Self-Priming Lift | 3 Ft. |
| Max Fluid Temperature | 130° F |
| Fluid compatibility | For use with non-flammable, non-abrasive liquids compatible with pump component materials. Verify chemical compatibility before use. |
| Seal compatibility | Always verify seal material compatibility with your specific fluid and chemical conditions. |
| Electrical | Requires a properly sized, grounded branch circuit. Do not use an extension cord. Protect motor with a properly sized thermal overload relay. |
| Temperature limit | Maximum fluid temperature 130° F. Exceeding this limit will damage seals and motor insulation. |
Motor Curves
Recently viewed
Similar Products
You'll Also Love...



















