Grundfos 97740184 | Horizontal | Multistage | End Suction | Stainless Steel | 4 Stages | 40 HP | ANSI Flange | Low NPSH

This item ships free!
GrundfosSKU: 97740184

Price:
Sale price$28,455.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CRN 64-4-2 H-G60-A-E-HQQE · Inline multi stage pumps
CRN 64-4-260 HzStainless steel

The Grundfos 97740184 (CRN 64-4-2 H-G60-A-E-HQQE) is a Inline multi stage pumps — Horizontal multistage end-suction pumps. Nominal performance: 337US gpm at 364.8ft.

Max Flow
337US gpm
Max Head
364.8ft
Max Pressure
435.11psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
gf-sh"
Why This Product

Genuine Grundfos Parts and Accessories

Genuine Grundfos replacement parts and accessories are manufactured to the same specifications as the original components — ensuring correct fit, correct function, and maintenance of original pump performance.

OEM Quality — Maintains Warranty Coverage

Using genuine Grundfos replacement parts maintains pump warranty coverage where applicable. Third-party parts may void warranty coverage and can cause performance changes and premature failure.

Compatibility Confirmed

Grundfos accessories and replacement parts are tested for compatibility with specific Grundfos pump models. Part numbers are model-specific — always verify using your pump's model number and serial number.

PumpStop Expert Support

Not sure if this is the right part for your pump? Contact PumpStop with your pump model number and serial number — our team will confirm compatibility before you order.

Model Code Decoded — CRN 64-4-2 H-G60-A-E-HQQE
Series: CRN 64-4-2
Model Code: CRN 64-4-2 H-G60-A-E-HQQE
Impeller Material: Stainless steel
Housing Material: Stainless steel
Shaft Seal Code: HQQE
Flange Rating: PN 40
Material Code: A
Pipe Code: G60
Pump Code: H
Performance
Nominal Flow 337US gpm
Nominal Head 364.8ft
Max Operating Pressure 435.11psi
Max Fluid Temperature 248°F
Electrical Specifications
Frequency 60 Hz
Pump Speed 3525rpm
Connections
Inlet Connection 3inch
Outlet Connection 2inch
Pipe Pressure Rating PN 40
Materials
Impeller Material Stainless steel
Housing Material Stainless steel
Shaft Seal HQQE
Product Identity
Model Number 97740184
Product Series CRN 64-4-2
Model Code CRN 64-4-2 H-G60-A-E-HQQE
Important Notices
Electrical Requires correctly rated supply — , 60 Hz. Install with correctly rated circuit protection and motor starter.
Temperature limits Do not exceed max fluid temperature 248°F. Operating outside these limits will damage seals and motor insulation.
Dry running Do not run dry. CRN 64-4-2 pumps use the pumped fluid to lubricate the shaft seal — dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance intervals. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CRN 64-4-2
✓ Product Data Sheet — CRN 64-4-2 H-G60-A-E-HQQE
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation requirements. For sizing help or spare parts guidance, chat or call (781) 281-8905.
Liquid max temp 248°F
n rpm 3525rpm
Pump version H

Motor Curves

Recently viewed

Similar Products