Image shown may not be actual product
Roll over image to zoom in
Click on image to zoom
Description
⚠ Discontinued Product
This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or discuss a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
SP125-2-AN · Grundfos Accessory / Spare Part / Control
The Grundfos 99547126 (SP125-2-AN) is a Grundfos Accessory / Spare Part / Control. Genuine Grundfos accessory, control component, spare part, or sensor. Nominal performance: 550US gpm at 108.3ft. Rated 380-400-415V, 3.0-Phase, 50 Hz.
Power
30HP
Voltage
380-400-415V
Phase
3.0-Phase
Max Flow
550US gpm
Max Head
108.3ft
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product
Genuine Grundfos Part
OEM component engineered and manufactured to Grundfos specifications. Maintains pump performance and warranty coverage.
Full Traceability
Genuine Grundfos parts carry manufacturer traceability from production through delivery. No counterfeit risk.
Authorized Source
PumpStop is an authorized Grundfos distributor. All parts are genuine — not aftermarket, not surplus.
Confirm Compatibility
Always verify part number against your pump model number and serial number before ordering. Contact PumpStop for parts identification assistance.
Technical Support Available
PumpStop technical team can identify correct parts from pump nameplate data, serial number, or model code. Call (781) 281-8905 or chat.
Contact for Availability
Parts availability varies. Contact PumpStop to confirm stock, lead time, and pricing before placing an order.
Model Information — SP125-2-AN
Series: ACC
Model Code: SP125-2-AN
Impeller Material: Stainless steel
Technical Specifications
| Model Number | 99547126 |
| Product Series | ACC |
| Series Description | Grundfos Accessory / Spare Part / Control |
| Power | 30HP |
| Voltage | 380-400-415V |
| Phase | 3.0-Phase |
| Frequency | 50 Hz |
| Motor Speed | 2850-2870-2880rpm |
| Pump Speed | 2900rpm |
| Full Load Current | 49.5-47.5-46.5A |
| Motor Type | MS6000 |
| Insulation Class | F |
| Protection Class (IP) | IP68 |
| Nominal Flow | 550US gpm |
| Nominal Head | 108.3ft |
| Max Fluid Temperature | 104°F |
| Outlet Connection | RP6 |
| Impeller Material | Stainless steel |
Important Notices
| Electrical | Verify supply voltage, phase, and frequency match nameplate before installation: 380-400-415V, 3.0-Phase, 50 Hz. |
| Temperature limits | Do not exceed max fluid temperature 104°F. Exceeding limits damages seals and motor insulation. |
| Dry running | Do not run dry. ACC pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations. |
| Maintenance | Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation. |
Documentation
✓ Installation and Operating Manual (IOM) — ACC Series
✓ Product Data Sheet — SP125-2-AN
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
- EAN
- 5713830871782
- Applic. motor
- Grundfos
- Approvals
- CE
- Built-in motor protection
- NONE
- Built-in temp. transmitter
- yes
- Curve tolerance
- ISO9906:2012 3B
- Density
- 62.29 lb/ft³
- Diameter
- 6 inch
- Enclosure class (IEC 34-5)
- IP68
- ErP status
- EuP Standalone/Prod.
- Gross weight
- 303.0 lb
- Impeller
- Stainless steel
- Insulation class (IEC 85)
- F
- Mains frequency
- 50 Hz
- Material Pricing Group
- 21
- Max liquid t at 0.15 m/sec
- 104 °F
- Maximum liquid temperature
- 104 °F
- Minimum efficiency index, MEI ≥
- -.--
- Model
- D
- Motor
- Grundfos
- Motor diameter
- 6 inch
- Motor type
- MS6000
- Motor version
- T40
- Net weight
- 238.0 lb
- Power (P2) required by pump
- 22 kW
- Power factor 1
- 0.86-0.84-0.82
- Pump
- 22 kW
- Pump outlet
- RP6
- Pump speed on which pump data are based
- 2900 rpm
- Pumped liquid
- Water
- Rated current
- 49.5-47.5-46.5 A
- Rated flow
- 550 US gpm
- Rated head
- 108.3 ft
- Rated power - P2
- 22 kW
- Rated speed
- 2850-2870-2880 rpm
- Rated voltage
- 3 x 380-400-415 V
- Real Time
- Delivery date to be confirmed on Sales Order Update with real time availability and Net price
- Selected liquid temperature
- 68 °F
- Shaft seal for motor
- SIC/SICFKM
- Stages
- 2
- Start. method
- direct-on-line
- Starting current
- 480-530-560 %
- Thermal protec
- external
- Type
- MS6000
- Valve
- YES
- Version
- T40
- Windings
- Enamelled
Image shown may not be actual product
Roll over image to zoom in
Click on image to zoom