Description
The Grundfos 98528463 (DDA 7.5-16 FCM-PV/T/C-F-31U7U7) is a Digital Dosing Pump — SMART. SMART Digital diaphragm dosing pump with internal brushless motor. High-end solution for complex dosing applications. Rated 100-240V, 1.0-Phase, 50 Hz.
SMART Digital Dosing
Microprocessor-controlled diaphragm pump with servo motor drive. Adjusts stroke and speed independently — true flow control from 0.1% to 100% without a bypass.
Brushless Servo Motor Drive
Brushless motor eliminates brush wear and motor maintenance. Expected service life significantly longer than traditional peristaltic or solenoid dosing pumps.
FlowControl Technology
Multi-sensor feedback loop adjusts dosing in real time based on system back pressure. Flow accuracy maintained regardless of pressure variation.
Degassing Function
Automatic degassing prevents air lock in chemical lines — critical for hypochlorite and other gas-generating chemicals. Runs without operator intervention.
All Major Communication Protocols
PROFIBUS, MODBUS, Profinet, GENIbus — DDA integrates with any automation or SCADA system. Remote monitoring and parameter adjustment included.
Chemical Resistance — Full Range
Wetted parts available in EPDM, FKM, PTFE, or stainless steel for virtually any dosing chemical. Confirm wetted material selection against your chemical before ordering.
| Model Number | 98528463 |
| Product Series | DDA |
| Series Description | Digital Dosing Pump — SMART |
| Voltage | 100-240V |
| Phase | 1.0-Phase |
| Frequency | 50 Hz |
| Protection Class (IP) | IP65 / TYPE 4X |
| Max Operating Pressure | 232.06psi |
| Max Fluid Temperature | 113°F |
| Max Ambient Temperature | 113°F |
| Min Ambient Temperature | 32°F |
| Inlet Connection | 0.17x 1/4, 1/4x3/8, 3/8x1/2" |
| Outlet Connection | 0.17x 1/4, 1/4x3/8, 3/8x1/2" |
| Approvals / Certifications | CE, CSA-US, NSF61, RCM |
| Electrical | Verify supply voltage, phase, and frequency match nameplate before installation: 100-240V, 1.0-Phase, 50 Hz. |
| Temperature limits | Do not exceed max fluid temperature 113°F or max ambient temperature 113°F. Exceeding limits damages seals and motor insulation. |
| Dry running | Do not run dry. DDA pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations. |
| Maintenance | Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation. |
- EAN
- 5711496620881
- Analog input
- 0/4-20 MA
- Approvals
- CE
- Communication
- YES
- Control panel
- FRONT-MOUNTED
- Control variant
- FCM
- Enclosure class (IEC 34-5)
- IP65 / NEMA 4X
- Gasket
- PTFE
- Gross weight
- 6.62 lb
- Inrush current
- 25A at 230V for 2ms
- Length of cable
- 1.5 m
- Level control
- YES
- Liquid temperature range
- 14 .. 113 °F
- Mains frequency
- 50 Hz
- Material Pricing Group
- 68
- Max. Flow
- 7.5 l/h
- Max. flow in slow mode 25%
- 1.88 l/h
- Max. flow in slow mode 50%
- 3.75 l/h
- Maximum operating pressure
- 16 bar
- Maximum power input - P1
- 24 W
- Min flow
- 2.5 ml/h
- Net weight
- 6.62 lb
- Power 1
- 24 W
- Power input - P1
- 24 W
- Pulse control
- YES
- Pump inlet
- 0.17x 1/4, 1/4x3/8, 3/8x1/2"
- Pump outlet
- 0.17x 1/4, 1/4x3/8, 3/8x1/2"
- Range of ambient temperature
- 32 .. 113 °F
- Rated voltage
- 1 x 100-240 V
- Real Time
- Delivery date to be confirmed on Sales Order Update with real time availability and Net price
- Turn-down ratio
- 2.125
- Type
- No installation set
- Type key
- DDA 7.5-16 FCM-PV/T/C-F-31U7U7
- Type of cable plug
- USA
- Valve ball
- Ceramic
- Valve type
- Standard