Grundfos 97736485 - CRN 10-17 H | Horizontal | End Suction

GrundfosSKU: 97736485

Price:
Sale price$12,559.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

⚠ Discontinued Product This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or discuss a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CRN 10-17 H · Vertical Multistage Centrifugal Pump — All Stainless
CRN60 HzStainless steel

The Grundfos 97736485 (CRN 10-17 H) is a Vertical Multistage Centrifugal Pump — All Stainless. All wetted parts in stainless steel EN 1.4401 (316). For food, beverage, pharmaceutical, and chemical applications where iron contamination must be avoided. Nominal performance: 52.8US gpm at 599.8ft.

Max Flow
52.8US gpm
Max Head
599.8ft
Max Pressure
362.59psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

All Stainless Steel Construction

Every wetted component — impeller, chambers, shaft, head — is stainless steel EN 1.4401 (316). No iron contact with the pumped fluid under any condition.

Corrosion-Resistant for Aggressive Fluids

316 stainless resists chlorides, mild acids, and alkaline cleaning agents. CRN is the preferred selection for food processing, pharmaceutical, and chemical dosing systems.

Cartridge Mechanical Seal

Factory-set cartridge seal eliminates field adjustment on installation. Seal options cover standard water through aggressive chemical service.

Dual Flange Standard — DIN, ANSI, JIS

CRN ships with combined DIN/ANSI/JIS flange connections. One pump fits piping standards across North American and international installations.

3-A and FDA-Compliant Options

Selected CRN configurations are 3-A certified for dairy and food processing. FDA-compliant elastomers available on request.

Wide Pressure Range

CRN series covers up to 60 bar operating pressure across pump sizes. Confirm your system maximum working pressure before selecting.

Model Information — CRN 10-17 H
Series: CRN
Model Code: CRN 10-17 H
Impeller Material: Stainless steel
Housing Material: Stainless steel
Shaft Seal: HQQV
Flange Rating: Class 300
Technical Specifications
Model Number 97736485
Product Series CRN
Series Description Vertical Multistage Centrifugal Pump — All Stainless
Frequency 60 Hz
Pump Speed 3444rpm
Nominal Flow 52.8US gpm
Nominal Head 599.8ft
Max Operating Pressure 362.59psi
Max Fluid Temperature 194°F
Inlet Connection 2.0inch
Outlet Connection 1.0inch
Pipe Pressure Rating Class 300
Impeller Material Stainless steel
Housing Material Stainless steel
Shaft Seal HQQV
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation.
Temperature limits Do not exceed max fluid temperature 194°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. CRN pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CRN Series
✓ Product Data Sheet — CRN 10-17 H
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5710623171609
Applications Pressure boosting, Industrial applications
Code for rubber V
Code for shaft seal HQQV
Connect code G05
Connection Class 300
Curve tolerance ISO9906:2012 3B
Density 62.29 lb/ft³
Flange size for motor 254TC
Gross weight 715.0 lb
Impeller Stainless steel
Impellers 17
Liquid temperature range -4 .. 194 °F
Low NPSH N
Material code G
Material Pricing Group 6
Max pressure at stated temp 363 psi / 194 °F
Maximum operating pressure 25 bar
Model A
Motor 254TC
Net weight 355.0 lb
Pressure rating for connection Class 300
Product family CRN-H
Pump speed on which pump data are based 3444 rpm
Pump version H
Pumped liquid Water
Rated flow 52.8 US gpm
Rated head 599.8 ft
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Rubber V
Sales region USA
Selected liquid temperature 68 °F
Size of inlet connection 2.0 inch
Size of outlet connection 1.0 inch
Stages 18
Version H

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products