Grundfos Pumps CR45-8-1 H-GB-A-E-HQQE 3x 230/460 60 HZ Horizontal Multistage Centrifugal Pump 97660293

This item ships free!
GrundfosSKU: 97660293

Contact for price
or Call for most up to date lead times. (781) 281-8905

Description

⚠ Discontinued Product This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or find a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CR 45-8-1 H-GB-A-E-HQQE · Inline multi stage pumps
CR 45-8-160HP230/460V3-Phase60 HzIE3 / NEMA PremiumTEFCStainless steel

The Grundfos 97660293 (CR 45-8-1 H-GB-A-E-HQQE) is a Inline multi stage pumps 60HP 230/460V 3-Phase — Horizontal multistage end-suction pumps. Nominal performance: 231US gpm at 727.4ft.

Power
60HP
Voltage
230/460V
Phase
3-Phase
Max Flow
231US gpm
Max Head
727.4ft
Max Pressure
435.11psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
IE3 / NEMA Premium motor — ultra-premium energy efficiency, reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
gf-sh"
Why This Product

Vertical Multistage Design — High Head at Compact Footprint

Stacked impeller design generates high discharge pressure at moderate flow — the correct performance curve for HVAC pressure boosting, water supply, and industrial applications where single-stage pumps cannot reach required head.

Cartridge Mechanical Seal — Tool-Free Replacement

Pre-set cartridge seal requires no measurement, no adjustment, and no special tools for replacement — just slide in and tighten. The cartridge design also prevents incorrect assembly, which is the most common cause of early seal failure.

In-Line Configuration — No Baseplate Required

Inlet and outlet ports are on the same level, allowing direct inline installation without baseplate, flexible connectors, or special support. Pipe-mounted installation reduces footprint and simplifies installation in mechanical rooms.

All Wetted Parts in Stainless Steel (316 / EN 1.4401)

All components in contact with the pumped fluid are in EN 1.4401 (316) stainless steel — impeller, pump shaft, chamber stacks, top and bottom flanges. No iron contamination in the fluid path. Correct for food-grade, pharmaceutical, and chemical applications.

IE5 Permanent Magnet Motor — Ultra-Premium Efficiency

IE5-rated permanent magnet synchronous motor exceeds even the IE4 "Super Premium" classification. Runs cooler, generates less heat loss, and maintains high efficiency across a wide speed range — important for variable speed applications where the motor rarely runs at full load.

Grundfos Global Service Network

Grundfos is the world's largest pump manufacturer — products are supported by a global service network with genuine spare parts, trained service engineers, and technical support available in North America and worldwide.

Model Code Decoded — CR 45-8-1 H-GB-A-E-HQQE
Series: CR 45-8-1
Model Code: CR 45-8-1 H-GB-A-E-HQQE
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal Code: HQQE
Flange Rating: PN 40
Material Code: A
Pipe Code: GB
Pump Code: H
Performance
Nominal Flow 231US gpm
Nominal Head 727.4ft
Max Operating Pressure 435.11psi
Max Fluid Temperature 248°F
Max Ambient Temperature 104°F
Electrical Specifications
Power 60HP
Voltage 230/460V
Phase 3-Phase
Frequency 60 Hz
Motor Speed 3560rpm
Pump Speed 3550rpm
Full Load Current 136/68A
Motor Type BALDOR
Motor Efficiency Class IE3 / NEMA Premium
Motor Efficiency IE3 93.6%
Insulation Class F
Protection Class (IP) TEFC
Connections
Inlet Connection 3inch
Outlet Connection 1 1/2inch
Pipe Pressure Rating PN 40
Materials
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal HQQE
Product Identity
Model Number 97660293
Product Series CR 45-8-1
Model Code CR 45-8-1 H-GB-A-E-HQQE
Important Notices
Electrical Requires correctly rated supply — 230/460V, 3-Phase, 60 Hz. Install with correctly rated circuit protection and motor starter.
Temperature limits Do not exceed max fluid temperature 248°F or max ambient temperature 104°F. Operating outside these limits will damage seals and motor insulation.
Dry running Do not run dry. CR 45-8-1 pumps use the pumped fluid to lubricate the shaft seal — dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance intervals. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CR 45-8-1
✓ Product Data Sheet — CR 45-8-1 H-GB-A-E-HQQE
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation requirements. For sizing help or spare parts guidance, chat or call (781) 281-8905.
EAN 5710620561359
Applications Chemical Delivery / Transfer, Filtration Systems, HVAC, Industrial Processes, Sprinkler / Irrigation, Washing / Cleaning Systems, Water Treatment
Connections_Discharge_Inches 3\" x 1 1/2\"
Rated power - P2 60
Voltage 230/460

Motor Curves

Recently viewed

Similar Products