Image shown may not be actual product
Roll over image to zoom in
Click on image to zoom
Description
Lutz Pumpen GmbH — Drum Pump Specialists since 1954 · Wertheim, Germany
Part 0201-215 · Dispensing Nozzle · Lutz-Zapfventil PP
The Lutz 0201-215 is a Dispensing Nozzle with Polypropylen glasfaserverstärkt (PP) housing. Delivers up to 40 l/min.
Max Flow
40 l/min
Max Temp
50°C
Type
Dispensing Nozzl
German Engineering
Manufactured in Wertheim, Germany to IEC and EU standards since 1954
Chemical-Grade Materials
Wetted materials selected for chemical compatibility — Polypropylen glasfaserverstärkt (PP)
IP Protected Motor
Motor protection — splash and dust resistant for industrial chemical environments
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product
Lutz Pumpen GmbH — German Engineering since 1954
Lutz Pumpen GmbH has manufactured drum pumps, pump tubes, and liquid transfer equipment in Wertheim, Germany since 1954. Products are manufactured to IEC, ATEX, and EU standards with independent third-party certification.
Chemical Compatibility — Verify Before Use
For all Lutz products in chemical service, verify material compatibility with your specific fluid, concentration, and temperature before installation. Lutz provides detailed chemical resistance data — contact PumpStop for guidance.
Technical Specifications
| Part Number | 0201-215 |
| Product Type | Dispensing Nozzle |
| Product Name | Lutz-Zapfventil PP |
| Housing Material | Polypropylen glasfaserverstärkt (PP) |
| Max Flow Rate | 40 l/min |
| Max Operating Pressure | 1 bar |
| Max Fluid Temperature | 50°C |
| Max Viscosity | 300 mPas |
| Type / Model Code | Zapfventil PP |
Important Notices
| Chemical compatibility | Always verify pump tube, impeller, and seal materials are compatible with your specific fluid, concentration, and temperature before installation. |
| Electrical safety | Connect only to the specified supply voltage. Protect motor with correctly rated overcurrent protection. |
| Explosion protection | Standard version is not explosion protected. For flammable fluids or hazardous locations, specify an ATEX-rated version. |
| Drum fit | Ensure the drum bung opening is compatible with the pump tube diameter before installation. The pump tube must not exceed the bung opening to ensure a leak-free, gas-tight connection. |
Documentation
✓ Product Specification Sheet — Lutz-Zapfventil PP
✓ Chemical Resistance Guide — Lutz Pump Materials
Need the spec sheet, chemical resistance data, or ATEX certificate? Contact PumpStop and we'll send it over.
Before You OrderVerify pump tube material compatibility with your specific fluid, concentration, and temperature. For configuration guidance, chat or call (781) 281-8905.
Image shown may not be actual product
Roll over image to zoom in
Click on image to zoom