Barnes Pump Repair Part SHELL, MOTOR, CI, 6.125" D (016-00107-101)

This item ships free!
BarnesSKU: 016-00107-101

Contact for price
or Call for most up to date lead times. (781) 281-8905

Description

Crane Pumps & Systems — Barnes Brand · Piqua, Ohio · Est. 1856
Model PUMP · Oil-Filled SH Solids Handling Pump · Barnes
3″-12″ DischargeUp to 9000 GPMUp to 262 ft Head5-125 HP Range

The Barnes PUMP, 208/230 (1 and 3 phase), 460, 575 barnes pump repair part shell, motor, ci, 6.125" d (016-00107-101). The Barnes Solids Handling pump series is engineered for applications involving sewage, effluent, wastewater processing and solids laden media. Barnes SH pumps utilize oil-filled submersible motors and are available in both standard and explosion proof designs Series capacity up to 9000 GPM at 262 ft head.

HP Range
5-125
Max Flow
9000 GPM
Max Head
262 ft
Discharge
3″-12″
Speed
850, 1150, 1750, 3450
Voltage
208/230 (1 and 3 phase), 460, 575
Crane Pumps Engineering
Barnes — manufactured by Crane Pumps & Systems, Piqua, Ohio since 1856
Crane Pumps & Systems
A Crane Co. company — 165+ years of pump engineering. Barnes, Burks, Deming, and Weinman under one roof in Piqua, Ohio
Wide HP Range
5-125 HP available
Expert Support
Technical sizing and compatibility help — call (781) 281-8905 or chat
Why This Product

Crane Pumps & Systems Engineering

Barnes, Burks, Deming, and Weinman pumps are manufactured by Crane Pumps & Systems in Piqua, Ohio — a Crane Co. company with 165+ years of pump engineering for commercial, industrial, and municipal applications.

Wide Performance Range

Multiple HP, voltage, and construction configurations cover your specific duty point. All models in the series share casing dimensions and spare parts — simplifying stocking and service.

Multiple Construction Options

Bronze fitted, all-bronze, all-iron, and specialty alloy configurations with multiple seal material options. Specify the combination matched to your fluid chemistry and service conditions.

Back Pull-Out Serviceability

Back pull-out pump design allows impeller, seal, and wear ring service without disconnecting suction or discharge piping — reducing field service time and cost on installed pumps.

NEMA-Frame Motors

Standard NEMA motor frame allows direct field motor replacement from any supplier — no custom parts, no factory service required when only the motor has failed.

National Service Network

Supported by a national network of authorized distributors and service centers with genuine Crane Pumps spare parts stocked for same-day or next-day availability.

Technical Specifications
Model Number 016-00107-101
Series Oil-Filled SH Solids Handling Pump
Brand Barnes
Horsepower 5-125
Voltage 208/230 (1 and 3 phase), 460, 575
Series HP Range 5-125
Max Flow Rate 9000 GPM
Max Head 262 ft
Discharge Size 3″-12″
Speed 850, 1150, 1750, 3450
Key Features
Explosion Proof Design – Class 1, Division 1, Groups C & D
Oil-Filled Motors
Suitable for use with VFD
Class H Insulation System
Plug-n-Play “Quick Connect” Cord With Integral Temperature & Moisture Sensors
Double Mechanical Seals
Oil Lubricated Bearings
Stainless Steel Lifting Bail And Hardware
CSA Certified
Available Options
White Iron (25% Chrome) Impeller
Impeller Trims To Meet Specified Conditions
Hard Face Seal Materials
Additional Cord Lengths
Guide Rail Systems
Leg Kit for Free Standing Applications
Typical Applications
Municipal Wastewater
Raw Sewage
Influent/Effluent Removal
RAS/WAS Sludge
Abrasive Wastewater Applications
Wastewater Treatment Plants
Collection Systems
Important Notices
Fluid compatibility For use with liquids compatible with pump component materials. Verify chemical, temperature, and pressure compatibility before use.
Electrical Requires a properly sized grounded branch circuit and motor starter with correctly rated thermal overload protection.
Operating limits Do not exceed series pressure, temperature, and speed ratings. Operation outside rated limits causes premature seal and bearing failure.
Service Disconnect and lockout/tagout power before any service. Allow pump to cool before handling after operation.
Available Documentation
✓ Product Specification Sheet — Oil-Filled SH Solids Handling Pump
✓ Installation, Operation & Maintenance Manual (IOM)
✓ Repair Parts Manual
✓ Product Catalog — Brochure
Need the spec sheet, IOM, or parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm HP, voltage, phase, and enclosure type are correct for your installation. All models in the Oil-Filled SH Solids Handling Pump share casing dimensions and spare parts — motor configuration is the only difference between models. For sizing guidance, chat or call (781) 281-8905.

Motor Curves

Recently viewed

Similar Products