Description
The Barnes UTILITY is a 1/6 HP, 120V barnes utility pump 1/6hp, 120v, single phase (ut17). The Barnes UT17 is a residential dewatering pump. It’s fully submersible, portable design includes a 0.75″ garden hose connection for simpple at-home use. The pump can dewater down to 0.25″ from the floor surface and includes GFCI compliant plug. Series capacity up to 16 gpm at 24 ft head.
Crane Pumps & Systems Engineering
Barnes, Burks, Deming, and Weinman pumps are manufactured by Crane Pumps & Systems in Piqua, Ohio — a Crane Co. company with 165+ years of pump engineering for commercial, industrial, and municipal applications.
Wide Performance Range
Multiple HP, voltage, and construction configurations cover your specific duty point. All models in the series share casing dimensions and spare parts — simplifying stocking and service.
Multiple Construction Options
Bronze fitted, all-bronze, all-iron, and specialty alloy configurations with multiple seal material options. Specify the combination matched to your fluid chemistry and service conditions.
Back Pull-Out Serviceability
Back pull-out pump design allows impeller, seal, and wear ring service without disconnecting suction or discharge piping — reducing field service time and cost on installed pumps.
NEMA-Frame Motors
Standard NEMA motor frame allows direct field motor replacement from any supplier — no custom parts, no factory service required when only the motor has failed.
National Service Network
Supported by a national network of authorized distributors and service centers with genuine Crane Pumps spare parts stocked for same-day or next-day availability.
| Model Number | UT17 |
| Series | Utility Pumps |
| Brand | Barnes |
| Horsepower | 1/6 HP |
| Voltage | 120V |
| Series HP Range | 0.17 |
| Max Flow Rate | 16 gpm |
| Max Head | 24 ft |
| Discharge Size | 0.75″ Garden Hose |
| Speed | 3450 |
| Fluid compatibility | For use with liquids compatible with pump component materials. Verify chemical, temperature, and pressure compatibility before use. |
| Electrical | Requires a properly sized grounded branch circuit and motor starter with correctly rated thermal overload protection. |
| Operating limits | Do not exceed series pressure, temperature, and speed ratings. Operation outside rated limits causes premature seal and bearing failure. |
| Service | Disconnect and lockout/tagout power before any service. Allow pump to cool before handling after operation. |