Grundfos 96411813 - TP 50-80/2 A-G-Z-BUBE-FY2 | Centrifugal

Save $2,919.15
GrundfosSKU: 96411813

Price:
Sale price$3,567.85 Regular price$6,487.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
96411813 · Inline Single-Stage Centrifugal Pump
TP0.75HP208-230YY/460YV3.0-Phase60 HzNEMA Premium / IE3 60HzIP55 Dust/JettingStainless steel

The Grundfos 96411813 (TP 50-80/2 A-G-Z-BUBE-FY2) is a Inline Single-Stage Centrifugal Pump. Single-stage close-coupled inline pump for HVAC heating and cooling. Suction and discharge on the same centerline. Nominal performance: 85.4US gpm at 21.65ft. Rated 208-230YY/460YV, 3.0-Phase, 60 Hz. Applications include HVAC: Heating, HVAC: Air Conditioning, Plumbing: Hot Water Recirculation and more.

Power
0.75HP
Voltage
208-230YY/460YV
Phase
3.0-Phase
Max Flow
85.4US gpm
Max Head
21.65ft
Max Pressure
145.04psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
NEMA Premium / IE3 60Hz motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Genuine Grundfos Part

OEM component engineered and manufactured to Grundfos specifications. Maintains pump performance and warranty coverage.

Full Traceability

Genuine Grundfos parts carry manufacturer traceability from production through delivery. No counterfeit risk.

Authorized Source

PumpStop is an authorized Grundfos distributor. All parts are genuine — not aftermarket, not surplus.

Confirm Compatibility

Always verify part number against your pump model number and serial number before ordering. Contact PumpStop for parts identification assistance.

Technical Support Available

PumpStop technical team can identify correct parts from pump nameplate data, serial number, or model code. Call (781) 281-8905 or chat.

Contact for Availability

Parts availability varies. Contact PumpStop to confirm stock, lead time, and pricing before placing an order.

Model Information — 96411813
Series: TP
Impeller Material: Stainless steel
Housing Material: Bronze
Shaft Seal: BQQE
Flange Rating: PN 10
Technical Specifications
Model Number 96411813
Product Series TP
Series Description Inline Single-Stage Centrifugal Pump
Power 0.75HP
Voltage 208-230YY/460YV
Phase 3.0-Phase
Frequency 60 Hz
Motor Speed 3430-3460rpm
Pump Speed 3440rpm
Full Load Current 2,40-2,30/1,20A
Motor Type 71BA
Motor Efficiency Class NEMA Premium / IE3 60Hz
Motor Efficiency 78.9-80.1%
Insulation Class F
Protection Class (IP) IP55 Dust/Jetting
Nominal Flow 85.4US gpm
Nominal Head 21.65ft
Max Operating Pressure 145.04psi
Max Fluid Temperature 284°F
Max Ambient Temperature 104°F
Min Ambient Temperature -22°F
Nominal Pipe Bore 2"inch
Pipe Pressure Rating PN 10
Pipe Standard GF
Impeller Material Stainless steel
Housing Material Bronze
Shaft Seal BQQE
Applications
HVAC: Heating
HVAC: Air Conditioning
Plumbing: Hot Water Recirculation
District heating
District cooling
Industrial heating
Cooling
Desalination
Drinking water treatment
Municipal water transportation
Rotor & spray irrigation
Ground water transfer
Livestock & Wildlife Watering
Water Treatment Fertigation
Chemigation & Dosing
Pivot & Lateral Irrigation
Frost protection
Solar boosting and water supply solutions
Controls and digital groundwater management
Solar controls and digital water management
Municipal solar solutions
Agriculture solar solutions
Livestock watering with solar solutions
Community solar solutions
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 208-230YY/460YV, 3.0-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 284°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. TP pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — TP Series
✓ Product Data Sheet — 96411813
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
Actual impeller diameter 2.91 in
Approvals on motor nameplate CE,CURUS,EAC
Built-in motor protection NONE
Connection 2"
Country code Namreg
Curve tolerance ISO9906:2012 3B2
Diameter 2.91 in
Flange standard USA
Frequency 60 Hz
Full load SF current 2,9-2,75/1,4 A
Gross weight 76.0 lb
Housing Bronze
Impeller Stainless steel
Insulation F
Insulation class (IEC 85) F
KVA code K
Liquid max temp 284°F
Liquid temperature range 5 .. 284 °F
Maximum operating pressure 145.04 psi
Minimum ambient temperature -22°F
Motor efficiency at 1/2 load 77.3-75.2 %
Motor efficiency at 3/4 load 79.9-79.3 %
Motor efficiency at full load 1 79.0-80.0 %
Motor type ML71BA, TEFC
n rpm F
Net weight 74.1 lb
P2 kW 0.75 HP
Phase 3
Pipe connection 2"
Power factor 1 0.84-0.78
Primary shaft seal BUBE
Pump housing Bronze
Range of ambient temperature -22 .. 104 °F
Rated current 2,40-2,30/1,20 A
Rated flow 88.1 US gpm
Rated head 21 ft
Rated power - P2 0.75 HP
Rated speed 3430-3460 rpm
Rated voltage 3 x 208-230YY/460Y V
Service factor 1.25
Shaft Product name:TP 50-80/2 A-G-Z-BUBE-FY2
Shaft seal BUBE
Standard USA
Type ML71BA, TEFC

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products