Grundfos 96411815 - TP 50-160/2 A-G-A-BUBE-HX2 | Centrifugal

Save $2,735.55
GrundfosSKU: 96411815

Price:
Sale price$3,343.45 Regular price$6,079.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
96411815 · Inline Single-Stage Centrifugal Pump
TP1.5HP208-230YY/460YV3.0-Phase60 HzNEMA Premium / IE3 60HzIP55 Dust/JettingStainless steel

The Grundfos 96411815 (TP 50-160/2 A-G-A-BUBE-HX2) is a Inline Single-Stage Centrifugal Pump. Single-stage close-coupled inline pump for HVAC heating and cooling. Suction and discharge on the same centerline. Nominal performance: 88.2US gpm at 39.83ft. Rated 208-230YY/460YV, 3.0-Phase, 60 Hz. Applications include HVAC: Heating.

Power
1.5HP
Voltage
208-230YY/460YV
Phase
3.0-Phase
Max Flow
88.2US gpm
Max Head
39.83ft
Max Pressure
145.04psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
NEMA Premium / IE3 60Hz motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Genuine Grundfos Part

OEM component engineered and manufactured to Grundfos specifications. Maintains pump performance and warranty coverage.

Full Traceability

Genuine Grundfos parts carry manufacturer traceability from production through delivery. No counterfeit risk.

Authorized Source

PumpStop is an authorized Grundfos distributor. All parts are genuine — not aftermarket, not surplus.

Confirm Compatibility

Always verify part number against your pump model number and serial number before ordering. Contact PumpStop for parts identification assistance.

Technical Support Available

PumpStop technical team can identify correct parts from pump nameplate data, serial number, or model code. Call (781) 281-8905 or chat.

Contact for Availability

Parts availability varies. Contact PumpStop to confirm stock, lead time, and pricing before placing an order.

Model Information — 96411815
Series: TP
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal: BQQE
Flange Rating: PN 10
Technical Specifications
Model Number 96411815
Product Series TP
Series Description Inline Single-Stage Centrifugal Pump
Power 1.5HP
Voltage 208-230YY/460YV
Phase 3.0-Phase
Frequency 60 Hz
Motor Speed 3440-3480rpm
Pump Speed 3520rpm
Full Load Current 4,45-4,3/2,16A
Motor Type 80CA
Motor Efficiency Class NEMA Premium / IE3 60Hz
Motor Efficiency 84.1-83.5%
Insulation Class F
Protection Class (IP) IP55 Dust/Jetting
Nominal Flow 88.2US gpm
Nominal Head 39.83ft
Max Operating Pressure 145.04psi
Max Fluid Temperature 248°F
Max Ambient Temperature 104°F
Min Ambient Temperature -22°F
Nominal Pipe Bore 2"inch
Pipe Pressure Rating PN 10
Pipe Standard GF
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal BQQE
Applications
HVAC: Heating
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 208-230YY/460YV, 3.0-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 248°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. TP pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — TP Series
✓ Product Data Sheet — 96411815
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
Actual impeller diameter 3.43 in
Approvals on motor nameplate CE,CURUS,IE3,EAC
Built-in motor protection NONE
Connection 2"
Country code Namreg
Curve tolerance ISO9906:2012 3B2
Diameter 3.43 in
DOE Pump Energy Index CL 0.91
Flange standard USA
Frequency 60 Hz
Full load SF current 5,2-5,1/2,55 A
Gross weight 73.0 lb
Housing Cast iron
Impeller Stainless steel
Insulation F
Insulation class (IEC 85) F
KVA code G
Liquid max temp 284°F
Liquid temperature range 5 .. 284 °F
Maximum operating pressure 145.04 psi
Minimum ambient temperature -22°F
Motor efficiency at 1/2 load 0.82
Motor efficiency at 3/4 load 83.5-81.0 %
Motor efficiency at full load 1 0.84
Motor type ML80BA, TEFC
n rpm F
Net weight 77.4 lb
P2 kW 1.5 HP
Phase 3
Pipe connection 2"
Power factor 1 0.84-0.75
Primary shaft seal BUBE
Pump housing Cast iron
Range of ambient temperature -22 .. 140 °F
Rated current 4,70-4,60/2,30 A
Rated flow 92.5 US gpm
Rated head 39.37 ft
Rated power - P2 1.5 HP
Rated speed 3450-3480 rpm
Rated voltage 3 x 208-230YY/460Y V
Service factor 1.15
Shaft Product name:TP 50-160/2 A-G-A-BUBE-HX2
Shaft seal BUBE
Standard USA
Type ML80BA, TEFC

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products