Prosser 125553 - Pump, SED51, .5 HP, 115V/1 115V 5 HP

This item ships free!
ProsserSKU: 125553

Price:
Sale price$2,366.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Crane Pumps & Systems — Prosser Brand · Piqua, Ohio · Est. 1856
Model PUMP · SE Solids Handling Pump · Prosser
5 HP4″ DischargeUp to 960 gpmUp to 126 ft Head0.75 – 15 HP Range

The Prosser PUMP is a 5 HP, 115V pump, sed51, .5 hp, 115v/1 115v 5 hp. Barnes 4SE Solids Handling pumps are commonly found in applications involving sewage, effluent, wastewater processing and solids laden media. Barnes Solids Handling pumps are constructed of durable cast iron with oil-filled motors to provide a pump tough enoug Series capacity up to 960 gpm at 126 ft head.

HP Range
0.75 – 15
Max Flow
960 gpm
Max Head
126 ft
Discharge
4″
Speed
1150, 1750, 3450
Voltage
115V
Crane Pumps Engineering
Prosser — manufactured by Crane Pumps & Systems, Piqua, Ohio since 1856
Crane Pumps & Systems
A Crane Co. company — 165+ years of pump engineering. Prosser, Burks, Deming, and Weinman under one roof in Piqua, Ohio
Wide HP Range
0.75 – 15 HP available
Expert Support
Technical sizing and compatibility help — call (781) 281-8905 or chat
Why This Product

Crane Pumps & Systems Engineering

Barnes, Burks, Deming, and Weinman pumps are manufactured by Crane Pumps & Systems in Piqua, Ohio — a Crane Co. company with 165+ years of pump engineering for commercial, industrial, and municipal applications.

Wide Performance Range

Multiple HP, voltage, and construction configurations cover your specific duty point. All models in the series share casing dimensions and spare parts — simplifying stocking and service.

Multiple Construction Options

Bronze fitted, all-bronze, all-iron, and specialty alloy configurations with multiple seal material options. Specify the combination matched to your fluid chemistry and service conditions.

Back Pull-Out Serviceability

Back pull-out pump design allows impeller, seal, and wear ring service without disconnecting suction or discharge piping — reducing field service time and cost on installed pumps.

NEMA-Frame Motors

Standard NEMA motor frame allows direct field motor replacement from any supplier — no custom parts, no factory service required when only the motor has failed.

National Service Network

Supported by a national network of authorized distributors and service centers with genuine Crane Pumps spare parts stocked for same-day or next-day availability.

Technical Specifications
Model Number 125553
Series SE Solids Handling Pump
Brand Prosser
Horsepower 5 HP
Voltage 115V
Series HP Range 0.75 – 15
Max Flow Rate 960 gpm
Max Head 126 ft
Discharge Size 4″
Speed 1150, 1750, 3450
Key Features
Solids Handling Capacity: 1.5-3″, depending on model
Oil Filled, VFD Suitable Motor
Double Mechanical Seal
Cast iron construction
Epoxy sealed cord housing with strain relief grommet
125 lb. ANSI Flange
50,000 hour bearing life
Stainless Steel lifting bail and hardware
Optional Vortex Impeller for increased solids handling
Moisture and Temperature Sensors
Available Options
Upgraded Seal Materials
Impeller trims to meet specified conditions
Break away fittings
Additional cord lengths
Important Notices
Fluid compatibility For use with liquids compatible with pump component materials. Verify chemical, temperature, and pressure compatibility before use.
Electrical Requires a properly sized grounded branch circuit and motor starter with correctly rated thermal overload protection.
Operating limits Do not exceed series pressure, temperature, and speed ratings. Operation outside rated limits causes premature seal and bearing failure.
Service Disconnect and lockout/tagout power before any service. Allow pump to cool before handling after operation.
Available Documentation
✓ Product Specification Sheet — SE Solids Handling Pump
✓ Installation, Operation & Maintenance Manual (IOM)
✓ Repair Parts Manual
Need the spec sheet, IOM, or parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm HP, voltage, phase, and enclosure type are correct for your installation. All models in the SE Solids Handling Pump share casing dimensions and spare parts — motor configuration is the only difference between models. For sizing guidance, chat or call (781) 281-8905.
Supplier Part Number 125553

Motor Curves

Recently viewed

Similar Products