Grundfos 92560690 - NBS 100-150/16.34 AGASG6S2ESBQQEVY6 | SelfPriming | Centrifugal | Horizontal

Save $7,140.28
GrundfosSKU: 92560690

Price:
Sale price$43,861.72 Regular price$51,002.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
92560690 · End-Suction Close-Coupled Pump — ANSI/NEMA
NBS100HP460V3.0-Phase60 HzIE3 / NEMA PremiumTEFCStainless steel

The Grundfos 92560690 (NBS 100-150/16.34 AGASG6S2ESBQQEVY6) is a End-Suction Close-Coupled Pump — ANSI/NEMA. Split-coupled end-suction pumps with NEMA standard motors and ANSI flange fittings for North American HVAC and industrial applications. Nominal performance: 3220US gpm at 100.9ft. Rated 460V, 3.0-Phase, 60 Hz. Applications include HVAC: Heating.

Power
100HP
Voltage
460V
Phase
3.0-Phase
Max Flow
3220US gpm
Max Head
100.9ft
Max Pressure
174.05psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
IE3 / NEMA Premium motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

ANSI/NEMA for North American Systems

NBS uses NEMA frame motors and ANSI 150# flanges — the standard for US and Canadian HVAC, water, and industrial systems. Direct replacement for existing ANSI pumps.

Back Pull-Out Design

The rotating element pulls out from the back without disturbing the pump casing or piping. Reduces maintenance downtime to minutes, not hours.

Close-Coupled — No Alignment

Motor and pump share one shaft. No coupling alignment on installation or after service. Reduces vibration and bearing wear.

Wide HP Range

NBS covers 1.5 HP through 75 HP in a single series. One spare impeller kit covers multiple pump sizes in the same installation.

Cast Iron or Stainless Options

Casing and impeller available in cast iron, bronze, or stainless depending on application. Specify material to match your system fluid.

Authorized Distributor — Full Warranty

PumpStop is an authorized Grundfos distributor. All NBS pumps ship with full Grundfos warranty and US technical support.

Model Information — 92560690
Series: NBS
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal: BQQE
Flange Rating: Class 125
Technical Specifications
Model Number 92560690
Product Series NBS
Series Description End-Suction Close-Coupled Pump — ANSI/NEMA
Power 100HP
Voltage 460V
Phase 3.0-Phase
Frequency 60 Hz
Motor Speed 1190rpm
Full Load Current 119A
Motor Efficiency Class IE3 / NEMA Premium
Motor Efficiency 95%
Protection Class (IP) TEFC
Nominal Flow 3220US gpm
Nominal Head 100.9ft
Max Operating Pressure 174.05psi
Max Fluid Temperature 248°F
Max Ambient Temperature 104°F
Inlet Connection 12inch
Outlet Connection 10inch
Pipe Pressure Rating Class 125
Pipe Standard ANSI
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal BQQE
Applications
HVAC: Heating
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 460V, 3.0-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 248°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. NBS pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — NBS Series
✓ Product Data Sheet — 92560690
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5715116278636
Actual impeller diameter 16.3 in
Bearing insulation type N-end Shaft grounding ring
Code for rubber E
Code for shaft seal BQQE
Connect code G
Connection Class 125
Curve tolerance 2B HI 14.6:2016
Density 62.29 lb/ft³
Diameter 16.3 in
Gross weight 3070.0 lb
Housing Cast iron
IE Efficiency class IE3 / NEMA Premium
Impeller Stainless steel
Internal pump house coating No coating
Liquid temperature range -13 .. 248 °F
Mains frequency 60 Hz
Material code S2
Material Pricing Group 5Y
Maximum ambient temperature 104 °F
Maximum operating pressure 12 bar
Motor standard NEMA
Mounting options design code B
Net weight 3070.0 lb
Number of poles 6
Pressure rating for connection Class 125
Pump housing Cast iron
Pump speed on which pump data are based 1190 rpm
Pump version AS
Pumped liquid Water
Rated current 119 A
Rated flow 3220 US gpm
Rated head 100.9 ft
Rated power - P2 75 kW
Rated speed 1190 rpm
Rated voltage 3 x 460 V
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Rubber E
Selected liquid temperature 68 °F
Shaft Stainless steel
Size of inlet connection 12 inch
Size of outlet connection 10 inch
Standard NEMA
Support block (Yes/No) Y
Type of connection ANSI
Version AS

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products