Grundfos 92560398 - NBS 060-095/9.21 AASG7SAESDQQEMY6 | SelfPriming | Centrifugal | Horizontal

Save $1,052.14
GrundfosSKU: 92560398

Price:
Sale price$18,431.86 Regular price$19,484.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
92560398 · End-Suction Close-Coupled Pump — ANSI/NEMA
NBS10HP230/460V3.0-Phase60 HzIE3 / NEMA PremiumTEFCStainless steel

The Grundfos 92560398 (NBS 060-095/9.21 AASG7SAESDQQEMY6) is a End-Suction Close-Coupled Pump — ANSI/NEMA. Split-coupled end-suction pumps with NEMA standard motors and ANSI flange fittings for North American HVAC and industrial applications. Nominal performance: 1230US gpm at 26.83ft. Rated 230/460V, 3.0-Phase, 60 Hz. Applications include HVAC: Heating.

Power
10HP
Voltage
230/460V
Phase
3.0-Phase
Max Flow
1230US gpm
Max Head
26.83ft
Max Pressure
362.59psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
IE3 / NEMA Premium motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

ANSI/NEMA for North American Systems

NBS uses NEMA frame motors and ANSI 150# flanges — the standard for US and Canadian HVAC, water, and industrial systems. Direct replacement for existing ANSI pumps.

Back Pull-Out Design

The rotating element pulls out from the back without disturbing the pump casing or piping. Reduces maintenance downtime to minutes, not hours.

Close-Coupled — No Alignment

Motor and pump share one shaft. No coupling alignment on installation or after service. Reduces vibration and bearing wear.

Wide HP Range

NBS covers 1.5 HP through 75 HP in a single series. One spare impeller kit covers multiple pump sizes in the same installation.

Cast Iron or Stainless Options

Casing and impeller available in cast iron, bronze, or stainless depending on application. Specify material to match your system fluid.

Authorized Distributor — Full Warranty

PumpStop is an authorized Grundfos distributor. All NBS pumps ship with full Grundfos warranty and US technical support.

Model Information — 92560398
Series: NBS
Impeller Material: Stainless steel
Housing Material: DUCTILE IRON
Shaft Seal: DQQE
Flange Rating: Class 300
Technical Specifications
Model Number 92560398
Product Series NBS
Series Description End-Suction Close-Coupled Pump — ANSI/NEMA
Power 10HP
Voltage 230/460V
Phase 3.0-Phase
Frequency 60 Hz
Motor Speed 1180rpm
Full Load Current 28.2-14.1A
Motor Efficiency Class IE3 / NEMA Premium
Motor Efficiency 91%
Protection Class (IP) TEFC
Nominal Flow 1230US gpm
Nominal Head 26.83ft
Max Operating Pressure 362.59psi
Max Fluid Temperature 284°F
Max Ambient Temperature 104°F
Inlet Connection 8inch
Outlet Connection 6inch
Pipe Pressure Rating Class 300
Pipe Standard ANSI
Impeller Material Stainless steel
Housing Material DUCTILE IRON
Shaft Seal DQQE
Applications
HVAC: Heating
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 230/460V, 3.0-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 284°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. NBS pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — NBS Series
✓ Product Data Sheet — 92560398
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
Actual impeller diameter 9.21 in
Bearing 1 Product name:NBS 060-095/9.21 AASG7SAESDQQEMY6
Bearing insulation type N-end No insulation
Code for rubber E
Code for shaft seal DQQE
Connect code G
Connection Class 300
Curve tolerance 2B HI 14.6:2016
Density 62.29 lb/ft³
Diameter 9.21 in
Enclosure class (IEC 34-5) TEFC
Frequency 60 Hz
Gross weight 709.0 lb
Housing DUCTILE IRON
IE Eff. Class IE3 / NEMA Premium
IE efficiency Product name:NBS 060-095/9.21 AASG7SAESDQQEMY6
IE Efficiency class IE3 / NEMA Premium
Impeller Stainless steel
Internal pump house coating No coating
Liquid max temp 248°F
Liquid temperature range -4 .. 248 °F
Material code SA
Maximum ambient temperature 104 °F
Maximum operating pressure 362.59 psi
Motor standard NEMA
Mounting options design code B
n rpm 1180rpm
Net weight 709.0 lb
Number of poles 6
P2 kW 10 HP
Phase 3
Pressure rating for connection Class 300
Pump housing DUCTILE IRON
Pump version AS
Pumped liquid Water
Rated current 28.2-14.1 A
Rated flow 1230 US gpm
Rated head 26.83 ft
Rated power - P2 10 HP
Rated speed 1180 rpm
Rated voltage 3 x 230/460 V
Rubber E
Selected liquid temperature 68 °F
Shaft Stainless steel
Shaft seal DQQE
Standard NEMA
Support block (Yes/No) Y
Type of connection ANSI
Version AS

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products