Grundfos 92560197 - NBS 050-095/7.72 AASG6S2ESBQQEKY6 | End Suction | Single Stage | Centrifugal

Save $429.19
GrundfosSKU: 92560197

Price:
Sale price$7,518.81 Regular price$7,948.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
92560197 · End-Suction Close-Coupled Pump — ANSI/NEMA
NBS5HP230/460V3.0-Phase60 HzIE3 / NEMA PremiumODPStainless steel

The Grundfos 92560197 (NBS 050-095/7.72 AASG6S2ESBQQEKY6) is a End-Suction Close-Coupled Pump — ANSI/NEMA. Split-coupled end-suction pumps with NEMA standard motors and ANSI flange fittings for North American HVAC and industrial applications. Nominal performance: 755US gpm at 18.09ft. Rated 230/460V, 3.0-Phase, 60 Hz. Applications include HVAC: Heating.

Power
5HP
Voltage
230/460V
Phase
3.0-Phase
Max Flow
755US gpm
Max Head
18.09ft
Max Pressure
174.05psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
IE3 / NEMA Premium motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

ANSI/NEMA for North American Systems

NBS uses NEMA frame motors and ANSI 150# flanges — the standard for US and Canadian HVAC, water, and industrial systems. Direct replacement for existing ANSI pumps.

Back Pull-Out Design

The rotating element pulls out from the back without disturbing the pump casing or piping. Reduces maintenance downtime to minutes, not hours.

Close-Coupled — No Alignment

Motor and pump share one shaft. No coupling alignment on installation or after service. Reduces vibration and bearing wear.

Wide HP Range

NBS covers 1.5 HP through 75 HP in a single series. One spare impeller kit covers multiple pump sizes in the same installation.

Cast Iron or Stainless Options

Casing and impeller available in cast iron, bronze, or stainless depending on application. Specify material to match your system fluid.

Authorized Distributor — Full Warranty

PumpStop is an authorized Grundfos distributor. All NBS pumps ship with full Grundfos warranty and US technical support.

Model Information — 92560197
Series: NBS
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal: BQQE
Flange Rating: Class 125
Technical Specifications
Model Number 92560197
Product Series NBS
Series Description End-Suction Close-Coupled Pump — ANSI/NEMA
Power 5HP
Voltage 230/460V
Phase 3.0-Phase
Frequency 60 Hz
Motor Speed 1160rpm
Full Load Current 14.8-7.4A
Motor Efficiency Class IE3 / NEMA Premium
Motor Efficiency 89.5%
Protection Class (IP) ODP
Nominal Flow 755US gpm
Nominal Head 18.09ft
Max Operating Pressure 174.05psi
Max Fluid Temperature 248°F
Max Ambient Temperature 104°F
Inlet Connection 6inch
Outlet Connection 5inch
Pipe Pressure Rating Class 125
Pipe Standard ANSI
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal BQQE
Applications
HVAC: Heating
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 230/460V, 3.0-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 248°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. NBS pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — NBS Series
✓ Product Data Sheet — 92560197
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
Actual impeller diameter 7.72 in
Bearing 1 Product name:NBS 050-095/7.72 AASG6S2ESBQQEKY6
Bearing insulation type N-end No insulation
Code for rubber E
Code for shaft seal BQQE
Connect code G
Connection Class 125
Curve tolerance 2B HI 14.6:2016
Density 62.29 lb/ft³
Diameter 7.72 in
Enclosure class (IEC 34-5) ODP
Frequency 60 Hz
Gross weight 434.0 lb
Housing Cast iron
IE Eff. Class IE3 / NEMA Premium
IE efficiency Product name:NBS 050-095/7.72 AASG6S2ESBQQEKY6
IE Efficiency class IE3 / NEMA Premium
Impeller Stainless steel
Internal pump house coating No coating
Liquid max temp 248°F
Liquid temperature range -13 .. 248 °F
Material code S2
Maximum ambient temperature 104 °F
Maximum operating pressure 174.05 psi
Motor standard NEMA
Mounting options design code B
n rpm 1160rpm
Net weight 434.0 lb
Number of poles 6
P2 kW 5 HP
Phase 3
Pressure rating for connection Class 125
Pump housing Cast iron
Pump version AS
Pumped liquid Water
Rated current 14.8-7.4 A
Rated flow 755 US gpm
Rated head 18.09 ft
Rated power - P2 5 HP
Rated speed 1160 rpm
Rated voltage 3 x 230/460 V
Rubber E
Selected liquid temperature 68 °F
Shaft Stainless steel
Shaft seal BQQE
Standard NEMA
Support block (Yes/No) Y
Type of connection ANSI
Version AS

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products