Grundfos 92560713 - NBS 015-095/7.01 AASG7SAESDQQEOX2 | SelfPriming | Centrifugal | Horizontal

Save $1,866.34
GrundfosSKU: 92560713

Price:
Sale price$11,464.66 Regular price$13,331.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
92560713 · End-Suction Close-Coupled Pump — ANSI/NEMA
NBS20HP230/460V3.0-Phase60 HzIE3 / NEMA PremiumTEFCStainless steel

The Grundfos 92560713 (NBS 015-095/7.01 AASG7SAESDQQEOX2) is a End-Suction Close-Coupled Pump — ANSI/NEMA. Split-coupled end-suction pumps with NEMA standard motors and ANSI flange fittings for North American HVAC and industrial applications. Nominal performance: 282US gpm at 173.7ft. Rated 230/460V, 3.0-Phase, 60 Hz. Applications include HVAC: Heating.

Power
20HP
Voltage
230/460V
Phase
3.0-Phase
Max Flow
282US gpm
Max Head
173.7ft
Max Pressure
362.59psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
IE3 / NEMA Premium motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

ANSI/NEMA for North American Systems

NBS uses NEMA frame motors and ANSI 150# flanges — the standard for US and Canadian HVAC, water, and industrial systems. Direct replacement for existing ANSI pumps.

Back Pull-Out Design

The rotating element pulls out from the back without disturbing the pump casing or piping. Reduces maintenance downtime to minutes, not hours.

Close-Coupled — No Alignment

Motor and pump share one shaft. No coupling alignment on installation or after service. Reduces vibration and bearing wear.

Wide HP Range

NBS covers 1.5 HP through 75 HP in a single series. One spare impeller kit covers multiple pump sizes in the same installation.

Cast Iron or Stainless Options

Casing and impeller available in cast iron, bronze, or stainless depending on application. Specify material to match your system fluid.

Authorized Distributor — Full Warranty

PumpStop is an authorized Grundfos distributor. All NBS pumps ship with full Grundfos warranty and US technical support.

Model Information — 92560713
Series: NBS
Impeller Material: Stainless steel
Housing Material: DUCTILE IRON
Shaft Seal: DQQE
Flange Rating: Class 300
Technical Specifications
Model Number 92560713
Product Series NBS
Series Description End-Suction Close-Coupled Pump — ANSI/NEMA
Power 20HP
Voltage 230/460V
Phase 3.0-Phase
Frequency 60 Hz
Motor Speed 3510rpm
Full Load Current 46-23A
Motor Efficiency Class IE3 / NEMA Premium
Motor Efficiency 91%
Protection Class (IP) TEFC
Nominal Flow 282US gpm
Nominal Head 173.7ft
Max Operating Pressure 362.59psi
Max Fluid Temperature 284°F
Max Ambient Temperature 104°F
Inlet Connection 2.5inch
Outlet Connection 1.5inch
Pipe Pressure Rating Class 300
Pipe Standard ANSI
Impeller Material Stainless steel
Housing Material DUCTILE IRON
Shaft Seal DQQE
Applications
HVAC: Heating
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 230/460V, 3.0-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 284°F or max ambient temperature 104°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. NBS pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — NBS Series
✓ Product Data Sheet — 92560713
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5715116279091
Actual impeller diameter 7.01 in
Bearing insulation type N-end No insulation
Code for rubber E
Code for shaft seal DQQE
Connect code G
Connection Class 300
Curve tolerance 2B HI 14.6:2016
Density 62.29 lb/ft³
Diameter 7.01 in
DOE Pump Energy Index CL 0.87
Gross weight 457.0 lb
Housing DUCTILE IRON
IE Efficiency class IE3 / NEMA Premium
Impeller Stainless steel
Internal pump house coating No coating
Liquid temperature range -4 .. 248 °F
Mains frequency 60 Hz
Material code SA
Material Pricing Group 5Y
Maximum ambient temperature 104 °F
Maximum operating pressure 25 bar
Motor standard NEMA
Mounting options design code C
Net weight 457.0 lb
Number of poles 2
Pressure rating for connection Class 300
Pump housing DUCTILE IRON
Pump speed on which pump data are based 3510 rpm
Pump version AS
Pumped liquid Water
Rated current 46-23 A
Rated flow 282 US gpm
Rated head 173.7 ft
Rated power - P2 15 kW
Rated speed 3510 rpm
Rated voltage 3 x 230/460 V
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Rubber E
Selected liquid temperature 68 °F
Shaft Stainless steel
Size of inlet connection 2.5 inch
Size of outlet connection 1.5 inch
Standard NEMA
Support block (Yes/No) Y
Type of connection ANSI
Version AS

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products