Grundfos 96440318 - MS 4000 | Submersible Motor | High Efficiency

GrundfosSKU: 96440318

Price:
Sale price$4,928.00
or Call for most up to date lead times. (781) 281-8905

Description

⚠ Discontinued Product This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or discuss a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
MS 4000 · Grundfos Accessory / Spare Part / Control
ACC10HP440-460V3-Phase60 HzIP68

The Grundfos 96440318 (MS 4000) is a Grundfos Accessory / Spare Part / Control. Genuine Grundfos accessory, control component, spare part, or sensor. Rated 440-460V, 3-Phase, 60 Hz. Applications include Rotor & spray irrigation, Ground water transfer, Livestock & Wildlife Watering and more.

Power
10HP
Voltage
440-460V
Phase
3-Phase
Frequency
60 Hz
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Genuine Grundfos Part

OEM component engineered and manufactured to Grundfos specifications. Maintains pump performance and warranty coverage.

Full Traceability

Genuine Grundfos parts carry manufacturer traceability from production through delivery. No counterfeit risk.

Authorized Source

PumpStop is an authorized Grundfos distributor. All parts are genuine — not aftermarket, not surplus.

Confirm Compatibility

Always verify part number against your pump model number and serial number before ordering. Contact PumpStop for parts identification assistance.

Technical Support Available

PumpStop technical team can identify correct parts from pump nameplate data, serial number, or model code. Call (781) 281-8905 or chat.

Contact for Availability

Parts availability varies. Contact PumpStop to confirm stock, lead time, and pricing before placing an order.

Model Information — MS 4000
Series: ACC
Model Code: MS 4000
Technical Specifications
Model Number 96440318
Product Series ACC
Series Description Grundfos Accessory / Spare Part / Control
Power 10HP
Voltage 440-460V
Phase 3-Phase
Frequency 60 Hz
Motor Speed 3420-3460rpm
Full Load Current 18.0-18.6A
Motor Type MS4000
Insulation Class F
Protection Class (IP) IP68
Applications
Rotor & spray irrigation
Ground water transfer
Livestock & Wildlife Watering
Water Treatment Fertigation
Chemigation & Dosing
Pivot & Lateral Irrigation
Frost protection
Solar boosting and water supply solutions
Controls and digital groundwater management
Solar controls and digital water management
Municipal solar solutions
Agriculture solar solutions
Livestock watering with solar solutions
Community solar solutions
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 440-460V, 3-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature per nameplate. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. ACC pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — ACC Series
✓ Product Data Sheet — MS 4000
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5700393989771
Applications Motors
Approvals CE
Axial load max 450 kg
Built-in motor protection NONE
Built-in temp. transmitter yes
Diameter 4 inch
Enclosure class (IEC 34-5) IP68
Insulation class (IEC 85) F
KVA code J
Locked-rotor torque 200-230 %
Mains frequency 60 Hz
Material Pricing Group 26
Maximum ambient pressure 60 bar
Maximum current consumption 18 A
Model B
Moment of inertia 0.085 lb ft²
Motor Stainless steel
Motor diameter 4 inch
Motor type MS4000
Motor version T40
Net weight 68.4 lb
Power factor 1 0.83-0.80
Product family MS 4000
Rated current 18.0-18.6 A
Rated power - P2 7.5 kW
Rated speed 3420-3460 rpm
Rated voltage 3 x 440-460 V
Real Time 1 Available on 10/13/2023 Plant: Allentown  Update with real time availability and Net price
Service factor 1.15
Shaft seal for motor HM/CER
Start. method direct-on-line
Starting current 600-640 %
Thermal protec external
Type MS4000
Version T40
Voltage tolerance +6/-10 %
Winding resistance 2.35 ohm
Windings Enamelled

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products