Grundfos 97722585 - DDA 17-7 AR-PV/E/C-F-32I004BG | Dosing Pump | Digital | High Accuracy

GrundfosSKU: 97722585

Price:
Sale price$4,132.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

⚠ Discontinued Product This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or find a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
DDA 17-7 AR-PV/E/C-F-32I004BG · Digital dosing pumps
DDA 17-7100-240V1-Phase50, 60 HzIP65 / TYPE 4X

The Grundfos 97722585 (DDA 17-7 AR-PV/E/C-F-32I004BG) is a Digital dosing pumps 100-240V 1-Phase — SMART Digital diaphragm dosing pump with internal brushless motor drive. High-end solution for complex and demanding applications (Digital Dosing Advanced).. Designed for Process liquids transfer, Cooling, Industrial process water treatment.

Voltage
100-240V
Phase
1-Phase
Frequency
50, 60 Hz
Max Pressure
101.53psi
Max Fluid Temp
113°F
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
gf-sh"
Why This Product

Motor-Driven Diaphragm — Precise and Pulsation-Free

Motor-driven diaphragm mechanism delivers chemically accurate dosing without the pressure variation of solenoid-driven designs. Consistent dose volume at each stroke regardless of back-pressure changes in the dosing line.

Grundfos Smart Digital Interface

DDA/DDC series pumps feature the Grundfos Smart Digital interface — touchscreen control, communication protocols (Profibus, Modbus, GENIbus), and external signal input for analogue control from analyzers and SCADA systems.

Chemical Resistance — PVDF and Stainless Construction

Liquid end components in PVDF (polyvinylidene fluoride), stainless steel, and EPDM/Viton for compatibility across a broad range of chemicals — acids, alkalis, oxidizers, and solvents used in water treatment and process applications.

Auto-Degas Function

Automatic degassing function purges gas bubbles from the pump head before dosing — critical for hypochlorite and other gas-releasing chemicals where air pockets cause dosing inaccuracy and pump damage.

Wide Flow Range with One Pump

Variable stroke frequency and length provide a wide effective flow range from a single pump — one pump covers multiple dosing rate requirements without requiring different pump models.

Leak Detection and Dry-Run Protection

Integrated leak detection and dry-run protection prevent chemical spills and pump damage from empty chemical containers — important safety features for unattended dosing installations.

Model Code Decoded — DDA 17-7 AR-PV/E/C-F-32I004BG
Series: DDA 17-7
Model Code: DDA 17-7 AR-PV/E/C-F-32I004BG
Performance
Max Operating Pressure 101.53psi
Max Fluid Temperature 113°F
Max Ambient Temperature 113°F
Min Ambient Temperature 32°F
Electrical Specifications
Voltage 100-240V
Phase 1-Phase
Frequency 50, 60 Hz
Protection Class (IP) IP65 / TYPE 4X
Cable / Plug Type USA, Canada
Connections
Inlet Connection Hose 3/8x1/2" S
Outlet Connection Hose 3/8x1/2" S
Materials
Gasket Material EPDM
Dosing Head Material PVDF (Polyvinylidene fluoride)
Product Identity
Model Number 97722585
Product Series DDA 17-7
Model Code DDA 17-7 AR-PV/E/C-F-32I004BG
Approvals / Certifications CE, CSA-US, NSF61, RCM
Applications
Process liquids transfer
Cooling
Industrial process water treatment
Important Notices
Electrical Requires correctly rated supply — 100-240V, 1-Phase, 50, 60 Hz. Install with correctly rated circuit protection and motor starter.
Temperature limits Do not exceed max fluid temperature 113°F or max ambient temperature 113°F. Operating outside these limits will damage seals and motor insulation.
Dry running Do not run dry. DDA 17-7 pumps use the pumped fluid to lubricate the shaft seal — dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance intervals. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — DDA 17-7
✓ Product Data Sheet — DDA 17-7 AR-PV/E/C-F-32I004BG
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation requirements. For sizing help or spare parts guidance, chat or call (781) 281-8905.
EAN 5710622727487
Applications Dosing & Disinfection
Analog input 0/4-20 MA
Approvals CE
Communication YES
Control panel FRONT-MOUNTED
Control variant AR
Density 62.29 lb/ft³
Enclosure class (IEC 34-5) IP65 / NEMA 4X
Gasket EPDM
Gross weight 6.62 lb
Inrush current 25A at 230V for 2ms
Length of cable 1.5 m
Level control YES
Liquid temperature range 14 .. 113 °F
Mains frequency 50 / 60 Hz
Material Pricing Group 68
Max. Flow 17 l/h
Max. flow in slow mode 25% 4.25 l/h
Max. flow in slow mode 50% 8.5 l/h
Maximum operating pressure 7 bar
Maximum power input - P1 24 W
Min flow 17.0 ml/h
Net weight 6.62 lb
Power 1 24 W
Power input - P1 24 W
Product family DDA
Pulse control YES
Pump inlet Hose 3/8x1/2" S
Pump outlet Hose 3/8x1/2" S
Pumped liquid Water
Range of ambient temperature 32 .. 113 °F
Rated voltage 1 x 100-240 V
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Selected liquid temperature 68 °F
Turn-down ratio 0.7361111111111112
Type 3/8"x1/2" up to 60 l/h
Type key DDA 17-7 AR-PV/E/C-F-32I004BG
Type of cable plug USA
Valve ball Ceramic
Valve type Spring-Loaded (HV-version)

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products