Image shown may not be actual product
Roll over image to zoom in
Click on image to zoom
Description
⚠ Discontinued Product
This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or discuss a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CRT 16-2 A-P-A-V-AUUV · Grundfos Accessory / Spare Part / Control
The Grundfos 96124891 (CRT 16-2 A-P-A-V-AUUV) is a Grundfos Accessory / Spare Part / Control. Genuine Grundfos accessory, control component, spare part, or sensor. Nominal performance: 79.3US gpm at 105.3ft. Applications include HVAC: Heating, HVAC: Air Conditioning, Plumbing: Pressure Boosting and more.
Max Flow
79.3US gpm
Max Head
105.3ft
Max Pressure
362.59psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product
Genuine Grundfos Part
OEM component engineered and manufactured to Grundfos specifications. Maintains pump performance and warranty coverage.
Full Traceability
Genuine Grundfos parts carry manufacturer traceability from production through delivery. No counterfeit risk.
Authorized Source
PumpStop is an authorized Grundfos distributor. All parts are genuine — not aftermarket, not surplus.
Confirm Compatibility
Always verify part number against your pump model number and serial number before ordering. Contact PumpStop for parts identification assistance.
Technical Support Available
PumpStop technical team can identify correct parts from pump nameplate data, serial number, or model code. Call (781) 281-8905 or chat.
Contact for Availability
Parts availability varies. Contact PumpStop to confirm stock, lead time, and pricing before placing an order.
Model Information — CRT 16-2 A-P-A-V-AUUV
Series: ACC
Model Code: CRT 16-2 A-P-A-V-AUUV
Seal Type: Cartridge seal — A rubber bellows, UU SiC/SiC faces, V FKM
Impeller Material: Titanium
Housing Material: Titanium
Shaft Seal: AUUV
Technical Specifications
| Model Number | 96124891 |
| Product Series | ACC |
| Series Description | Grundfos Accessory / Spare Part / Control |
| Frequency | 60 Hz |
| Pump Speed | 3454rpm |
| Nominal Flow | 79.3US gpm |
| Nominal Head | 105.3ft |
| Max Operating Pressure | 362.59psi |
| Max Fluid Temperature | 194°F |
| Nominal Pipe Bore | PJE 2 |
| Pipe Standard | Victaulic |
| Impeller Material | Titanium |
| Housing Material | Titanium |
| Shaft Seal | AUUV |
| Approvals / Certifications | CE |
Applications
HVAC: Heating
HVAC: Air Conditioning
Plumbing: Pressure Boosting
District heating
District cooling
Machining
Wash and clean
Process liquids transfer
Industrial heating
Cooling
Industrial water supply & transfer
Industrial wastewater treatment & reuse
Industrial process water treatment
Desalination
Municipal surface water
Drinking water treatment
Municipal water transportation
Municipal solar solutions
Rotor & spray irrigation
Ground water transfer
Livestock & Wildlife Watering
Water Treatment Fertigation
Chemigation & Dosing
Pivot & Lateral Irrigation
Frost protection
Solar boosting and water supply solutions
Controls and digital groundwater management
Solar controls and digital water management
Municipal solar solutions
Agriculture solar solutions
Livestock watering with solar solutions
Community solar solutions
Important Notices
| Electrical | Verify supply voltage, phase, and frequency match nameplate before installation. |
| Temperature limits | Do not exceed max fluid temperature 194°F. Exceeding limits damages seals and motor insulation. |
| Dry running | Do not run dry. ACC pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations. |
| Maintenance | Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation. |
Documentation
✓ Installation and Operating Manual (IOM) — ACC Series
✓ Product Data Sheet — CRT 16-2 A-P-A-V-AUUV
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
- EAN
- 5700397139844
- Applications
- Industrial applications
- Approvals
- CE
- Code for rubber
- V
- Connect code
- P
- Connection
- PJE 2
- Curve tolerance
- ISO9906:2012 3B
- Density
- 62.29 lb/ft³
- Flange size for motor
- 184TC
- Flange standard
- Victaulic
- Frequency
- 60 HZ
- Frequency converter
- NONE
- Gross weight
- 73.9 lb
- Head max
- 128.6 ft
- Housing
- Titanium
- Impeller
- Titanium
- Impellers
- 2
- Liquid max temp
- 90°C
- Liquid temperature range
- -4 .. 194 °F
- Low NPSH
- N
- Material code
- A
- Material Pricing Group
- 6
- Max pressure at stated temp
- 363 psi / 194 °F
- Maximum operating pressure
- 362.59 psi
- Maximum permissible operating pressure
- 25bar
- Model
- A
- Motor
- 184TC
- Motor standard
- NEMA
- n rpm
- 3454rpm
- Net weight
- 51.8 lb
- Number of poles
- 2
- Pipe connection
- PJE 2
- Power (P2) required by pump
- 5 HP
- Primary shaft seal
- AUUV
- Product family
- CRT 16
- Pump
- 5 HP
- Pump housing
- Titanium
- Pump version
- A
- Pumped liquid
- Water
- Rated flow
- 79.3 US gpm
- Rated flow 2
- 79.3 US gpm
- Rated head
- 105.3 ft
- Rated head 2
- 105.3 ft
- Real Time
- Delivery date to be confirmed on Sales Order Update with real time availability and Net price
- Rubber
- V
- Selected liquid temperature
- 68 °F
- Shaft seal
- AUUV
- Stages
- 3
- Standard
- Victaulic
- Version
- A
Dimensional Drawing
Image shown may not be actual product
Roll over image to zoom in
Click on image to zoom