Grundfos 99050568 - CRNE 3-23 Q-P-T-V-HQQV | Multistage | SelfPriming | Centrifugal | Vertical | Horizontal

GrundfosSKU: 99050568

Price:
Sale price$13,243.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CRNE 3-23 Q-P-T-V-HQQV · Vertical Multistage Centrifugal Pump — All Stainless Variable Speed
CRNE8HP380-500V3.0-Phase50, 60 HzIE5IP55Stainless steel

The Grundfos 99050568 (CRNE 3-23 Q-P-T-V-HQQV) is a Vertical Multistage Centrifugal Pump — All Stainless Variable Speed. All stainless steel construction with integrated variable frequency drive. Variable speed and full stainless for demanding chemical or food-grade applications. Nominal performance: 22US gpm at 814ft. Rated 380-500V, 3.0-Phase, 50, 60 Hz. Applications include HVAC: Heating, HVAC: Air Conditioning, Plumbing: Pressure Boosting and more.

Power
8HP
Voltage
380-500V
Phase
3.0-Phase
Max Flow
22US gpm
Max Head
814ft
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Ultra-Premium Efficiency
IE5 motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Variable Speed Plus All Stainless

CRNE combines IE5 variable speed with 316 stainless steel wetted construction — the full specification for demanding chemical, food, and pharmaceutical pressure systems.

IE5 Permanent Magnet Motor

Highest efficiency class motor reduces operating cost. Especially effective in pressure systems that spend most runtime below maximum flow.

Integrated Drive — No Cabinet Required

VFD is inside the pump head. Eliminates separate drive panel, reduces installation footprint, and simplifies commissioning.

All Stainless Steel Wetted Path

Every surface in contact with the fluid is EN 1.4401 (316) stainless. Suitable for chlorinated water, mild acids, cleaning agents, and process chemicals.

iSOLUTIONS Connectivity

Supports MODBUS, PROFIBUS, BACnet, and Grundfos GO for full BMS integration and remote performance monitoring.

Cartridge Seal — No Adjustment

Factory-set cartridge seal. No field adjustment on installation. Seal variants available for water, chemical, and high-temperature service.

Model Information — CRNE 3-23 Q-P-T-V-HQQV
Series: CRNE
Model Code: CRNE 3-23 Q-P-T-V-HQQV
Seal Type: Cartridge seal — H rubber bellows, QQ SiC/SiC faces, V FKM O-ring
Impeller Material: Stainless steel
Housing Material: Stainless steel
Shaft Seal: HQQV
Technical Specifications
Model Number 99050568
Product Series CRNE
Series Description Vertical Multistage Centrifugal Pump — All Stainless Variable Speed
Power 8HP
Voltage 380-500V
Phase 3.0-Phase
Frequency 50, 60 Hz
Motor Speed 480-5900rpm
Pump Speed 4500rpm
Full Load Current 11,5-9.00A
Motor Type 132SE
Motor Protection ELEC
Motor Efficiency Class IE5
Insulation Class F
Protection Class (IP) IP55
Nominal Flow 22US gpm
Nominal Head 814ft
Max Fluid Temperature 194°F
Max Ambient Temperature 122°F
Nominal Pipe Bore 1 1/4inch
Pipe Standard PJE
Impeller Material Stainless steel
Housing Material Stainless steel
Shaft Seal HQQV
Approvals / Certifications CE, UKCA, SEPRO, RCM
Applications
HVAC: Heating
HVAC: Air Conditioning
Plumbing: Pressure Boosting
District heating
District cooling
Machining
Wash and clean
Process liquids transfer
Industrial heating
Cooling
Industrial water supply & transfer
Industrial wastewater treatment & reuse
Industrial process water treatment
Desalination
Municipal surface water
Drinking water treatment
Municipal water transportation
Municipal solar solutions
Rotor & spray irrigation
Ground water transfer
Livestock & Wildlife Watering
Water Treatment Fertigation
Chemigation & Dosing
Pivot & Lateral Irrigation
Frost protection
Solar boosting and water supply solutions
Controls and digital groundwater management
Solar controls and digital water management
Municipal solar solutions
Agriculture solar solutions
Livestock watering with solar solutions
Community solar solutions
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 380-500V, 3.0-Phase, 50, 60 Hz.
Temperature limits Do not exceed max fluid temperature 194°F or max ambient temperature 122°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. CRNE pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CRNE Series
✓ Product Data Sheet — CRNE 3-23 Q-P-T-V-HQQV
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5712605799061
Applications Industrial applications
Approvals CE
Approvals and markings 355.8 m
Battery back-up 355.8 m
Built-in motor protection ELEC
Code for rubber V
Code for shaft seal HQQV
Colour 355.8 m
Config. file no 99063562
Connect code P
Connection 1 1/4 inch
Control panel HMI200 - Standard
Curve tolerance ISO9906:2012 3B
Density 62.29 lb/ft³
Enclosure class (IEC 34-5) IP55
Flange size for motor FT130
Flow range 355.8 m
Frequency converter Built-in
Function Module FM300 - Advanced
Gross weight 181.0 lb
Head max 355.8 m
Housing Stainless steel
IE Efficiency class IE5
Impeller Stainless steel
Impellers 23
Insulation class (IEC 85) F
Length 355.8 m
Liquid temperature range -4 .. 194 °F
Low NPSH N
Mains frequency 50 / 60 Hz
Material code T
Material Pricing Group 31
Max pressure at stated temp 725 psi / 194 °F
Maximum ambient temperature 122 °F
Minimum efficiency index, MEI ≥ 0.7
Model A
Motor Standard motor size
Motor type 132SE
Net weight 134.0 lb
Number of leads 355.8 m
Pipework connection 355.8 m
Power factor 1 0.92-0.89
Pressure retention valve 355.8 m
Product family CRNE 3-HS
Pump housing Stainless steel
Pump speed on which pump data are based 4500 rpm
Pump version Q
Pumped liquid Water
Rated current 11.5-9.00 A
Rated flow 22 US gpm
Rated head 814 ft
Rated power - P2 6 kW
Rated speed 480-5900 rpm
Rated voltage 3 x 380-500 V
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Rubber V
Selected liquid temperature 68 °F
Sens.interface 355.8 m
Size of connection 1 1/4 inch
Stages 23
Type 132SE
Type of connection PJE
Valve type 355.8 m
Version Q

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products