Image shown may not be actual product
Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV
Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV
Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV
Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV
Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV
Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV

Grundfos 97739368 - CRN 32-1 H-G50-A-V-HQQV

Save $3,846.72
GRUNDFOSSKU: 97739368
Price:
$4,167.28 $8,014.00
Delivery date to be confirmed on Sales Order
Chat or Call for most up to date lead times. (781) 281-8905

Description

CRN 32-1 H-G50-A-V-HQQV | CR-H pumps are horizontal end suction pumps typically mounted on baseplates. The end suction design enables the pump to be installed horizontally in traditional, end suction design piping where the pump has an axial suction port and a radial center line discharge port. This design allows “back pull-out” capability. This means the pump usually can be easily serviced without removing the volute from the pipe system. CR-H pumps can be selected that meet ASME B73. 1 dimensional standards for suction and discharge piping as well as many of the baseplate dimensional standards. CR-H pumps do not fully comply with the ASME B73. 1 specification.

Motor efficiency at full load 1 88.5-88.5 %
IE Efficiency class NEMA Premium / IE3 60Hz
Code for rubber V
Maximum ambient temperature 140 °F
Material code A
Maximum operating pressure 232.06 psi
Power factor 1 0.89-0.86
Support bearing Graflon
Bearing 1 Graflon
Rated voltage 3 x 208-230YY/460Y V
Flange size for motor 182TC
Starting current 1000-1470 %
Connect code G50
Liquid temperature range -4 .. 194 °F
Insulation class (IEC 85) F
IE efficiency Product name:CRN 32-1 H-G50-A-V-HQQV
Motor efficiency at 1/2 load 86.9-84.7 %
Built-in motor protection PTC
Net weight 227.0 lb
Number of poles 2
Rated speed 3525-3540 rpm
Gross weight 388.0 lb
Rated power - P2 5.5 HP
Enclosure class (IEC 34-5) 55 Dust/Jetting
Power (P2) required by pump 5.5 HP
Pressure rating for connection PN 16
Motor efficiency at 3/4 load 88.5-87.3 %
Shaft Product name:CRN 32-1 H-G50-A-V-HQQV
Rated current 14,1-13,1/7,29 A
Service factor 1.15
Frequency converter NONE
Sales region USA
Motor type 112CA
Pressure sensor N
Stages 1
Rated flow 96.9 US gpm
Model B
Version H
Cooling TEFC
Motor 182TC
Rubber V
Approvals on nameplate CURUS
Maximum head 88.92 ft
Motor standard NEMA
Rated head 77.43 ft
Type 112CA
Curve tolerance ISO9906:2012 3B
Impellers 0
Connection PN 16
Impeller Stainless steel
Code for shaft seal HQQV
Number of reduced-diameter impellers 0
Flange rating inlet 150 lb
Pump 5.5 HP
Low NPSH N
Standard NEMA
Pump version H

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed