Image shown may not be actual product
Grundfos 97733309 - CRN 1S-6 H-GA-A-E-HQQE
Grundfos 97733309 - CRN 1S-6 H-GA-A-E-HQQE
Grundfos 97733309 - CRN 1S-6 H-GA-A-E-HQQE
Grundfos 97733309 - CRN 1S-6 H-GA-A-E-HQQE

Grundfos 97733309 - CRN 1S-6 H-GA-A-E-HQQE

Save $1,624.80
GRUNDFOSSKU: 97733309
Price:
$1,760.20 $3,385.00
Delivery date to be confirmed on Sales Order
Chat or Call for most up to date lead times. (781) 281-8905

Description

CRN 1S-6 H-GA-A-E-HQQE | CR-H pumps are horizontal end suction pumps typically mounted on baseplates. The end suction design enables the pump to be installed horizontally in traditional, end suction design piping where the pump has an axial suction port and a radial center line discharge port. This design allows “back pull-out” capability. This means the pump usually can be easily serviced without removing the volute from the pipe system. CR-H pumps can be selected that meet ASME B73. 1 dimensional standards for suction and discharge piping as well as many of the baseplate dimensional standards. CR-H pumps do not fully comply with the ASME B73. 1 specification.

Motor efficiency at full load 1 79.5-80.6 %
IE Efficiency class NEMA Premium / IE3 60Hz
Code for rubber E
Maximum ambient temperature 140 °F
Material code A
Maximum operating pressure 232.06 psi
Power factor 1 0.84-0.78
Bearing 1 SIC
Rated voltage 3 x 208-230YY/460Y V
Flange size for motor 56C
Starting current 590-650 %
Connect code GA
Liquid temperature range -4 .. 248 °F
Insulation class (IEC 85) F
IE efficiency Product name:CRN 1S-6 H-GA-A-E-HQQE
Motor efficiency at 1/2 load 77.1-75.4 %
Built-in motor protection NONE
Net weight 53.1 lb
Number of poles 2
Rated speed 3430-3460 rpm
Gross weight 65.4 lb
Rated power - P2 0.5 HP
Enclosure class (IEC 34-5) 55 Dust/Jetting
Power (P2) required by pump 0.5 HP
Pressure rating for connection PN 16
Motor efficiency at 3/4 load 79.9-79.5 %
Shaft Product name:CRN 1S-6 H-GA-A-E-HQQE
Rated current 1.64-1.55/0.78 A
Service factor 1.25
Frequency converter NONE
Sales region USA
Motor type 71AB
Pressure sensor N
Stages 6
Rated flow 4.84 US gpm
Model A
Version H
Cooling TEFC
Motor 56C
Rubber E
Approvals on nameplate CURUS,NSF/ANSI 61
Maximum head 168.3 ft
Motor standard NEMA
Rated head 114.2 ft
Type 71AB
Curve tolerance ISO9906:2012 3B
Impellers 0
Connection PN 16
Impeller Stainless steel
Code for shaft seal HQQE
Number of reduced-diameter impellers 0
Flange rating inlet 150 lb
Pump 0.5 HP
Low NPSH N
Standard NEMA
Pump version H

Recently viewed