Description
The Grundfos 99510082 (CRE 5-18 A-FGJ-A-E-HQQE) is a Vertical Multistage Centrifugal Pump — Variable Speed. Cast iron head and base, stainless steel wetted parts, with integrated variable frequency drive and IE5-rated permanent magnet motor for energy-optimized pressure control.
Integrated Variable Frequency Drive
The VFD is built into the pump head — no external drive cabinet, no panel wiring, no drive-to-motor cable. Reduces panel space, installation cost, and failure points.
IE5 Permanent Magnet Motor
CRE uses a Grundfos MGE permanent magnet motor rated IE5 — the highest commercially available efficiency class. Significant energy reduction vs IE3 motors at partial load.
Proportional Pressure Control
AUTOADAPT automatically adjusts set point based on actual system demand. No manual curve adjustment needed after commissioning.
iSOLUTIONS Ready
CRE supports Grundfos GO app, CIM communication modules (PROFIBUS, MODBUS, BACnet), and remote monitoring. Full integration into building management systems.
Soft Start Built In
The integrated drive provides controlled ramp-up, eliminating water hammer and reducing mechanical stress on seals and couplings at every start.
Pump Protection Built In
Dry-run protection, over-temperature shutdown, and motor current monitoring are standard in every CRE. No external protection relay required.
| Model Number | 99510082 |
| Product Series | CRE |
| Series Description | Vertical Multistage Centrifugal Pump — Variable Speed |
| Seal Code | HQQE |
| Seal Description | Cartridge seal — H rubber bellows, QQ SiC/SiC faces, E EPDM O-ring |
| Electrical | Verify supply voltage, phase, and frequency match nameplate before installation. |
| Temperature limits | Do not exceed max fluid temperature per nameplate. Exceeding limits damages seals and motor insulation. |
| Dry running | Do not run dry. CRE pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations. |
| Maintenance | Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation. |
- EAN
- 5713830279045
- Approvals
- CE
- Code for rubber
- E
- Code for shaft seal
- HQQE
- Config. file no
- 99074199
- Connect code
- FGJ
- Connection
- DIN / ANSI / JIS
- Curve tolerance
- ISO9906:2012 3B
- Density
- 62.29 lb/ft³
- Frequency converter
- Built-in
- Gross weight
- 197.0 lb
- Impeller
- Stainless steel
- Impellers
- 0
- Liquid temperature range
- -4 .. 248 °F
- Low NPSH
- N
- Material code
- A
- Material Pricing Group
- 31
- Max pressure at stated temp
- 363 psi / 250 °F
- Maximum head
- 588 ft
- Maximum operating pressure
- 25 bar
- Model
- A
- Motor standard
- NEMA
- Net weight
- 179.0 lb
- Number of reduced-diameter impellers
- 0
- Power (P2) required by pump
- 5.5 kW
- Pressure sensor
- N
- Pump
- 5.5 kW
- Pump speed on which pump data are based
- 3467 rpm
- Pump version
- A
- Pumped liquid
- Water
- Rated flow
- 30.4 US gpm
- Rated head
- 440.3 ft
- Real Time
- Delivery date to be confirmed on Sales Order Update with real time availability and Net price
- Rubber
- E
- Selected liquid temperature
- 68 °F
- Stages
- 18
- Standard
- NEMA
- Type of connection
- DIN / ANSI / JIS
- Version
- A
Dimensional Drawing