Image shown may not be actual product
Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV
Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV
Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV
Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV
Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV
Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV

Grundfos 97653275 - CR 5-2 H-GA-A-V-HQQV

Save $1,464.00
GRUNDFOSSKU: 97653275
Price:
$1,586.00 $3,050.00
Delivery date to be confirmed on Sales Order
Chat or Call for most up to date lead times. (781) 281-8905

Description

CR 5-2 H-GA-A-V-HQQV | CR-H pumps are horizontal end suction pumps typically mounted on baseplates. The end suction design enables the pump to be installed horizontally in traditional, end suction design piping where the pump has an axial suction port and a radial center line discharge port. This design allows “back pull-out” capability. This means the pump usually can be easily serviced without removing the volute from the pipe system. CR-H pumps can be selected that meet ASME B73. 1 dimensional standards for suction and discharge piping as well as many of the baseplate dimensional standards. CR-H pumps do not fully comply with the ASME B73. 1 specification.

Approvals on nameplate CURUS
Bearing 1 SIC
Built-in motor protection NONE
Code for rubber V
Code for shaft seal HQQV
Connect code GA
Connection PN 16
Cooling TEFC
Curve tolerance ISO9906:2012 3B
Enclosure class (IEC 34-5) 55 Dust/Jetting
Flange rating inlet 150 lb
Flange size for motor 56C
Frequency 60 Hz
Frequency converter NONE
Gross weight 70.8 lb
IE Eff. Class NEMA Premium / IE3 60Hz
IE efficiency Product name:CR 5-2 H-GA-A-V-HQQV
IE Efficiency class NEMA Premium / IE3 60Hz
Impeller Stainless steel
Impellers 0
Insulation F
Insulation class (IEC 85) F
IP Class 55 Dust/Jetting
Liquid max temp 194°F
Liquid temperature range -4 .. 194 °F
Low NPSH N
Material code A
Maximum ambient temperature 140 °F
Maximum head 67.26 ft
Maximum operating pressure 232.06 psi
Model A
Motor 56C
Motor efficiency at 1/2 load 77.3-75.2 %
Motor efficiency at 3/4 load 79.9-79.3 %
Motor efficiency at full load 1 78.9-80.1 %
Motor standard NEMA
Motor type 71BA
n rpm F
Net weight 58.5 lb
Number of poles 2
Number of reduced-diameter impellers 0
P2 kW 0.75 HP
Phase 3
Power (P2) required by pump 0.75 HP
Power factor 1 0.84-0.78
Pressure rating for connection PN 16
Pressure sensor N
Pump 0.75 HP
Pump version H
Rated current 2.40-2.30/1.20 A
Rated flow 30.8 US gpm
Rated head 43.64 ft
Rated power - P2 0.75 HP
Rated speed 3430-3460 rpm
Rated voltage 3 x 208-230YY/460Y V
Rubber V
Sales region USA
Service factor 1.25
Shaft Product name:CR 5-2 H-GA-A-V-HQQV
Shaft seal HQQV
Stages 2
Standard NEMA
Starting current 590-650 %
Type 71BA
Version H

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed