Grundfos 99130683 - CR 32-11 A-F-A-E-HQBE | Multistage | Centrifugal | Vertical | Inline

GRUNDFOSSKU: 99130683

Contact for price
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CR 32-11 A-F-A-E-HQBE · Vertical Multistage Centrifugal Pump
CR30HP380-415DV3.0-Phase50 HzIE3IP55 Dust/JettingStainless steel

The Grundfos 99130683 (CR 32-11 A-F-A-E-HQBE) is a Vertical Multistage Centrifugal Pump. Cast iron head and base, stainless steel wetted parts. Used in water supply, pressure boosting, HVAC, and industrial liquid transfer. Nominal performance: 132US gpm at 555.1ft. Rated 380-415DV, 3.0-Phase, 50 Hz.

Power
30HP
Voltage
380-415DV
Phase
3.0-Phase
Max Flow
132US gpm
Max Head
555.1ft
Max Pressure
435.11psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
IE3 motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Vertical Multistage Design

Multiple stages in series deliver high head at compact footprint. CR handles up to 60 bar and flow ranges from 0.5 to 900 m³/h across the series range.

Stainless Steel Wetted Parts

All parts in contact with the pumped fluid are stainless steel — impeller, shaft, chamber. Cast iron is used only for the head and base which never contact the fluid.

QuickTight Connection System

No special tools needed for coupling. Integrated coupling design reduces installation and service time.

Wide Configuration Range

Available in 60+ frame sizes and 16 impeller variants. CR can be configured for almost any pressure/flow combination in commercial and industrial water systems.

Authorized Grundfos Distributor

PumpStop supplies genuine Grundfos CR pumps with full manufacturer warranty and factory-trained technical support.

Contact PumpStop for Sizing

The CR family covers a wide operating range. Contact PumpStop to confirm the correct model, voltage, and frequency for your system.

Model Information — CR 32-11 A-F-A-E-HQBE
Series: CR
Model Code: CR 32-11 A-F-A-E-HQBE
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal: HQBE
Flange Rating: PN 40
Technical Specifications
Model Number 99130683
Product Series CR
Series Description Vertical Multistage Centrifugal Pump
Power 30HP
Voltage 380-415DV
Phase 3.0-Phase
Frequency 50 Hz
Motor Speed 2950rpm
Pump Speed 2947rpm
Full Load Current 40,5-38,0A
Motor Type 180BA
Motor Protection PTC
Motor Efficiency Class IE3
Motor Efficiency 92.7-92.7%
Insulation Class F
Protection Class (IP) IP55 Dust/Jetting
Nominal Flow 132US gpm
Nominal Head 555.1ft
Max Operating Pressure 435.11psi
Max Fluid Temperature 248°F
Max Ambient Temperature 140°F
Inlet Connection DN 65
Outlet Connection DN 65
Pipe Pressure Rating PN 40
Pipe Standard DIN
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal HQBE
Approvals / Certifications CE, EAC, UKCA, SEPRO
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 380-415DV, 3.0-Phase, 50 Hz.
Temperature limits Do not exceed max fluid temperature 248°F or max ambient temperature 140°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. CR pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CR Series
✓ Product Data Sheet — CR 32-11 A-F-A-E-HQBE
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5712607315894
Actual impeller diameter 4.66 in
Approvals EAC
Approvals for drinking water WRAS
Bearing 1 Graflon
Built-in motor protection PTC
Code for rubber E
Code for shaft seal HQBE
Connect code F
Connection PN 40
Curve tolerance ISO9906:2012 3B
Density 62.29 lb/ft³
Diameter 4.66 in
DOE Pump Energy Index CL 0.87
Enclosure class (IEC 34-5) 55 Dust/Jetting
Flange size for motor FF300
Frequency converter NONE
Gross weight 584.0 lb
IE Efficiency class IE3
Impeller Stainless steel
Impellers 0
Insulation class (IEC 85) F
Liquid temperature range 32 .. 248 °F
Low NPSH N
Mains frequency 50 Hz
Material code A
Material Pricing Group 6
Max pressure at stated temp 435 psi / 250 °F
Maximum ambient temperature 140 °F
Maximum head 704.1 ft
Maximum operating pressure 30 bar
Minimum efficiency index, MEI ≥ 0.7
Model B
Motor FF300
Motor efficiency at 1/2 load 94.4-94.1 %
Motor efficiency at 3/4 load 93.7-94.0 %
Motor efficiency at full load 1 92.7-92.7 %
Motor standard IEC
Motor type 180BA
Net weight 485.0 lb
Number of poles 2
Number of reduced-diameter impellers 0
Power (P2) required by pump 22 kW
Power factor 1 0.90-0.90
Pressure rating for connection PN 40
Pressure sensor N
Pump 22 kW
Pump speed on which pump data are based 2947 rpm
Pump version A
Pumped liquid Water
Rated current 40.5-38.0 A
Rated flow 132 US gpm
Rated head 555.1 ft
Rated power - P2 22 kW
Rated speed 2950 rpm
Rated voltage 3 x 380-415D V
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Rubber E
Selected liquid temperature 68 °F
Service factor 1
Size of inlet connection DN 65
Size of outlet connection DN 65
Stages 11
Standard IEC
Starting current 8.3
Support bearing Graflon
Type 180BA
Type of connection DIN
Version A

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products