Image shown may not be actual product
Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE
Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE
Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE
Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE
Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE
Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE

Grundfos 97653196 - CR 32-1 H-G05-A-E-HQQE

Save $3,026.40
GRUNDFOSSKU: 97653196
Price:
$3,278.60 $6,305.00
Delivery date to be confirmed on Sales Order
Chat or Call for most up to date lead times. (781) 281-8905

Description

CR 32-1 H-G05-A-E-HQQE | CR-H pumps are horizontal end suction pumps typically mounted on baseplates. The end suction design enables the pump to be installed horizontally in traditional, end suction design piping where the pump has an axial suction port and a radial center line discharge port. This design allows “back pull-out” capability. This means the pump usually can be easily serviced without removing the volute from the pipe system. CR-H pumps can be selected that meet ASME B73. 1 dimensional standards for suction and discharge piping as well as many of the baseplate dimensional standards. CR-H pumps do not fully comply with the ASME B73. 1 specification.

Approvals on nameplate CURUS,NSF/ANSI 61
Bearing 1 Graflon
Built-in motor protection PTC
Code for rubber E
Code for shaft seal HQQE
Connect code G05
Connection PN 16
Cooling TEFC
Curve tolerance ISO9906:2012 3B
Enclosure class (IEC 34-5) 55 Dust/Jetting
Flange rating inlet 150 lb
Flange size for motor 182TC
Frequency 60 Hz
Frequency converter NONE
Gross weight 386.0 lb
IE Eff. Class NEMA Premium / IE3 60Hz
IE efficiency Product name:CR 32-1 H-G05-A-E-HQQE
IE Efficiency class NEMA Premium / IE3 60Hz
Impeller Stainless steel
Impellers 0
Insulation F
Insulation class (IEC 85) F
IP Class 55 Dust/Jetting
Liquid max temp 248°F
Liquid temperature range -22 .. 248 °F
Low NPSH N
Material code A
Maximum ambient temperature 140 °F
Maximum head 88.92 ft
Maximum operating pressure 232.06 psi
Model B
Motor 182TC
Motor efficiency at 1/2 load 86.9-84.7 %
Motor efficiency at 3/4 load 88.5-87.3 %
Motor efficiency at full load 1 88.5-88.5 %
Motor standard NEMA
Motor type 112CA
n rpm F
Net weight 225.0 lb
Number of poles 2
Number of reduced-diameter impellers 0
P2 kW 5.5 HP
Phase 3
Power (P2) required by pump 5.5 HP
Power factor 1 0.89-0.86
Pressure rating for connection PN 16
Pressure sensor N
Pump 5.5 HP
Pump version H
Rated current 14,1-13,1/7,29 A
Rated flow 96.9 US gpm
Rated head 77.43 ft
Rated power - P2 5.5 HP
Rated speed 3525-3540 rpm
Rated voltage 3 x 208-230YY/460Y V
Rubber E
Sales region USA
Service factor 1.15
Shaft Product name:CR 32-1 H-G05-A-E-HQQE
Shaft seal HQQE
Stages 1
Standard NEMA
Starting current 1000-1470 %
Support bearing Graflon
Type 112CA
Version H

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed