Image shown may not be actual product
Grundfos 97575081 - CR 3-13 H-GA-A-E-HQQE
Grundfos 97575081 - CR 3-13 H-GA-A-E-HQQE
Grundfos 97575081 - CR 3-13 H-GA-A-E-HQQE
Grundfos 97575081 - CR 3-13 H-GA-A-E-HQQE

Grundfos 97575081 - CR 3-13 H-GA-A-E-HQQE

Save $1,621.44
GRUNDFOSSKU: 97575081
Price:
$1,756.56 $3,378.00
Delivery date to be confirmed on Sales Order
Chat or Call for most up to date lead times. (781) 281-8905

Description

CR 3-13 H-GA-A-E-HQQE | CR-H pumps are horizontal end suction pumps typically mounted on baseplates. The end suction design enables the pump to be installed horizontally in traditional, end suction design piping where the pump has an axial suction port and a radial center line discharge port. This design allows “back pull-out” capability. This means the pump usually can be easily serviced without removing the volute from the pipe system. CR-H pumps can be selected that meet ASME B73. 1 dimensional standards for suction and discharge piping as well as many of the baseplate dimensional standards. CR-H pumps do not fully comply with the ASME B73. 1 specification.

Approvals on nameplate CE,NSF/ANSI 61
Bearing 1 SIC
Code for rubber E
Code for shaft seal HQQE
Connect code GA
Connection PN 16
Curve tolerance ISO9906:2012 3B
Flange rating inlet 150 lb
Flange size for motor 182TC
Frequency converter NONE
Gross weight 66.9 lb
Impeller Stainless steel
Impellers 0
Liquid max temp 248°F
Liquid temperature range -4 .. 248 °F
Low NPSH N
Material code A
Maximum head 410.1 ft
Maximum operating pressure 232.06 psi
Model A
Motor 182TC
Motor standard NEMA
n rpm 3461rpm
Net weight 54.6 lb
Number of reduced-diameter impellers 0
Pressure rating for connection PN 16
Pressure sensor N
Pump Y
Pump version H
Rated flow 15.4 US gpm
Rated head 309.1 ft
Rubber E
Sales region USA
Shaft Product name:CR 3-13 H-GA-A-E-HQQE
Shaft seal HQQE
Stages 13
Standard NEMA
Version H

Motor Curves

Dimensional Drawing

Recently viewed