Grundfos 97654441 - CR 1S-3 H-GA-A-V-HQQV | Horizontal | End Suction

Save $1,082.84
GrundfosSKU: 97654441

Price:
Sale price$1,447.16 Regular price$2,530.00
Delivery date to be confirmed on Sales Order
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CR 1S-3 H-GA-A-V-HQQV · Vertical Multistage Centrifugal Pump
CR0.33HP208-230YY/460YV3-Phase60 HzNEMA Premium / IE3 60HzIP55 Dust/JettingStainless steel

The Grundfos 97654441 (CR 1S-3 H-GA-A-V-HQQV) is a Vertical Multistage Centrifugal Pump. Cast iron head and base, stainless steel wetted parts. Used in water supply, pressure boosting, HVAC, and industrial liquid transfer. Nominal performance: 4.84US gpm at 58.4ft. Rated 208-230YY/460YV, 3-Phase, 60 Hz.

Power
0.33HP
Voltage
208-230YY/460YV
Phase
3-Phase
Max Flow
4.84US gpm
Max Head
58.4ft
Max Pressure
232.06psi
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
NEMA Premium / IE3 60Hz motor — reduces operating cost over service life
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Vertical Multistage Design

Multiple stages in series deliver high head at compact footprint. CR handles up to 60 bar and flow ranges from 0.5 to 900 m³/h across the series range.

Stainless Steel Wetted Parts

All parts in contact with the pumped fluid are stainless steel — impeller, shaft, chamber. Cast iron is used only for the head and base which never contact the fluid.

QuickTight Connection System

No special tools needed for coupling. Integrated coupling design reduces installation and service time.

Wide Configuration Range

Available in 60+ frame sizes and 16 impeller variants. CR can be configured for almost any pressure/flow combination in commercial and industrial water systems.

Authorized Grundfos Distributor

PumpStop supplies genuine Grundfos CR pumps with full manufacturer warranty and factory-trained technical support.

Contact PumpStop for Sizing

The CR family covers a wide operating range. Contact PumpStop to confirm the correct model, voltage, and frequency for your system.

Model Information — CR 1S-3 H-GA-A-V-HQQV
Series: CR
Model Code: CR 1S-3 H-GA-A-V-HQQV
Seal Type: Cartridge seal — H rubber bellows, QQ SiC/SiC faces, V FKM O-ring
Impeller Material: Stainless steel
Housing Material: Cast iron
Shaft Seal: HQQV
Flange Rating: PN 16
Technical Specifications
Model Number 97654441
Product Series CR
Series Description Vertical Multistage Centrifugal Pump
Power 0.33HP
Voltage 208-230YY/460YV
Phase 3-Phase
Frequency 60 Hz
Motor Speed 3450-3480rpm
Pump Speed 3425rpm
Full Load Current 1,12-1.10/0.55A
Motor Type 71AA
Motor Efficiency Class NEMA Premium / IE3 60Hz
Motor Efficiency 78.8-79.3%
Insulation Class F
Protection Class (IP) IP55 Dust/Jetting
Nominal Flow 4.84US gpm
Nominal Head 58.4ft
Max Operating Pressure 232.06psi
Max Fluid Temperature 194°F
Max Ambient Temperature 140°F
Inlet Connection 1 1/2inch
Outlet Connection 1inch
Pipe Pressure Rating PN 16
Impeller Material Stainless steel
Housing Material Cast iron
Shaft Seal HQQV
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation: 208-230YY/460YV, 3-Phase, 60 Hz.
Temperature limits Do not exceed max fluid temperature 194°F or max ambient temperature 140°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. CR pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CR Series
✓ Product Data Sheet — CR 1S-3 H-GA-A-V-HQQV
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
Approvals on nameplate CURUS
Bearing 1 SIC
Built-in motor protection NONE
Code for rubber V
Code for shaft seal HQQV
Connect code GA
Connection PN 16
Cooling TEFC
Curve tolerance ISO9906:2012 3B
Enclosure class (IEC 34-5) 55 Dust/Jetting
Flange rating inlet 150 lb
Flange size for motor 56C
Frequency 60 Hz
Frequency converter NONE
Gross weight 70.2 lb
IE Eff. Class NEMA Premium / IE3 60Hz
IE efficiency Product name:CR 1S-3 H-GA-A-V-HQQV
IE Efficiency class NEMA Premium / IE3 60Hz
Impeller Stainless steel
Impellers 0
Insulation F
Insulation class (IEC 85) F
IP Class 55 Dust/Jetting
Liquid max temp 194°F
Liquid temperature range -4 .. 194 °F
Low NPSH N
Material code A
Maximum ambient temperature 140 °F
Maximum head 84.65 ft
Maximum operating pressure 232.06 psi
Model A
Motor 56C
Motor efficiency at 1/2 load 73.1-71.5 %
Motor efficiency at 3/4 load 77.6-77 %
Motor efficiency at full load 1 78.8-79.3 %
Motor standard NEMA
Motor type 71AA
n rpm F
Net weight 57.9 lb
Number of poles 2
Number of reduced-diameter impellers 0
P2 kW 0.33 HP
Phase 3
Power (P2) required by pump 0.33 HP
Power factor 1 0.81-0.75
Pressure rating for connection PN 16
Pressure sensor N
Pump 0.33 HP
Pump version H
Rated current 1,12-1.10/0.55 A
Rated flow 4.84 US gpm
Rated head 58.4 ft
Rated power - P2 0.33 HP
Rated speed 3450-3480 rpm
Rated voltage 3 x 208-230YY/460Y V
Rubber V
Sales region USA
Service factor 1.35
Shaft Product name:CR 1S-3 H-GA-A-V-HQQV
Shaft seal HQQV
Stages 3
Standard NEMA
Starting current 630-700 %
Type 71AA
Version H

Motor Curves

Dimensional Drawing

DWiring Diagram

Recently viewed

Similar Products