Description
The Burks 10GV6-1-1/4FC 10gv6-1-1/4fc — gv series pump, frame 10, model 6, 1-1/4" frame-coupled. Burks condensate units are designed for automatic return of hot water condensation from radiators, coils, etc. to low and high pressure boilers, or for return of water and other liquids to the overhead tanks of industrial gravity circulating systems. All units Series capacity up to 80 gpm at 130 ft head.
Crane Pumps & Systems Engineering
Barnes, Burks, Deming, and Weinman pumps are manufactured by Crane Pumps & Systems in Piqua, Ohio — a Crane Co. company with 165+ years of pump engineering for commercial, industrial, and municipal applications.
Wide Performance Range
Multiple HP, voltage, and construction configurations cover your specific duty point. All models in the series share casing dimensions and spare parts — simplifying stocking and service.
Multiple Construction Options
Bronze fitted, all-bronze, all-iron, and specialty alloy configurations with multiple seal material options. Specify the combination matched to your fluid chemistry and service conditions.
Back Pull-Out Serviceability
Back pull-out pump design allows impeller, seal, and wear ring service without disconnecting suction or discharge piping — reducing field service time and cost on installed pumps.
NEMA-Frame Motors
Standard NEMA motor frame allows direct field motor replacement from any supplier — no custom parts, no factory service required when only the motor has failed.
National Service Network
Supported by a national network of authorized distributors and service centers with genuine Crane Pumps spare parts stocked for same-day or next-day availability.
| Model Number | -17FH00 |
| Series | Condensate Return Systems |
| Brand | Burks |
| Horsepower | 0.33 – 3 |
| Series HP Range | 0.33 – 3 |
| Max Flow Rate | 80 gpm |
| Max Head | 130 ft |
| Discharge Size | 1.25″ |
| Speed | 3450 |
| Fluid compatibility | For use with liquids compatible with pump component materials. Verify chemical, temperature, and pressure compatibility before use. |
| Electrical | Requires a properly sized grounded branch circuit and motor starter with correctly rated thermal overload protection. |
| Operating limits | Do not exceed series pressure, temperature, and speed ratings. Operation outside rated limits causes premature seal and bearing failure. |
| Service | Disconnect and lockout/tagout power before any service. Allow pump to cool before handling after operation. |
- Supplier Part Number
- -17FH00