Grundfos 98160847 - CR3-17 A-FGJ-A-E-HQQE 3x230/400 50HZ | Vertical | Multistage | Centrifugal

Save $2,076.00
GrundfosSKU: 98160847

Price:
Sale price$2,249.00 Regular price$4,325.00
or Call for most up to date lead times. (781) 281-8905

Description

Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CR3-17 A-FGJ-A-E-HQQE · Vertical Multistage Centrifugal Pump
Vertical Multistage Centrifuga50 HzVertical

The Grundfos 98160847 (CR3-17 A-FGJ-A-E-HQQE) is a Vertical Multistage Centrifugal Pump. Cast iron head and base, stainless steel wetted parts. The industry-standard workhorse for HVAC pressure boosting, water supply, industrial, and irrigation applications.

Motor
ECM permanent magnet (IE5)
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Model Code Decoded
Model code decoded — series, size, stages, seal, connection, motor variant
Industrial Grade
Built and tested to IEC, NEMA, and NSF standards
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Vertical Multistage Design — High Head at Compact Footprint

Stacked impeller design generates high discharge pressure at moderate flow — the correct performance curve for HVAC pressure boosting, water supply, and industrial applications where single-stage pumps cannot reach required head.

Cartridge Mechanical Seal — Tool-Free Replacement

Pre-set cartridge seal requires no measurement, no adjustment, and no special tools for replacement — just slide in and tighten. The cartridge design also prevents incorrect assembly, which is the most common cause of early seal failure.

In-Line Configuration — No Baseplate Required

Inlet and outlet ports are on the same level, allowing direct inline installation without baseplate, flexible connectors, or special support. Pipe-mounted installation reduces footprint and simplifies installation in mechanical rooms.

All Wetted Parts in Stainless Steel (316 / EN 1.4401)

All components in contact with the pumped fluid are in EN 1.4401 (316) stainless steel — impeller, pump shaft, chamber stacks, top and bottom flanges. No iron contamination in the fluid path. Correct for food-grade, pharmaceutical, and chemical applications.

IE5 Permanent Magnet Motor — Ultra-Premium Efficiency

IE5-rated permanent magnet synchronous motor exceeds even the IE4 "Super Premium" classification. Runs cooler, generates less heat loss, and maintains high efficiency across a wide speed range — important for variable speed applications where the motor rarely runs at full load.

Grundfos Global Service Network

Grundfos is the world's largest pump manufacturer — products are supported by a global service network with genuine spare parts, trained service engineers, and technical support available in North America and worldwide.

Model Code Decoded — CR3-17 A-FGJ-A-E-HQQE
Series: Vertical Multistage Centrifugal Pump
Model Code: CR3-17 A-FGJ-A-E-HQQE
Impeller Variant: Standard
Pipe Connection: Combined DIN/ANSI/JIS flanges
Motor Variant: ECM permanent magnet (IE5)
Shaft Seal Code: HQQE
Shaft Seal: Cartridge seal — rubber bellows / SiC-SiC faces / EPDM O-rings
Technical Specifications
Model Number 98160847
Product Series Vertical Multistage Centrifugal Pump
Model Code CR3-17 A-FGJ-A-E-HQQE
Frequency 50 Hz
Motor Type ECM permanent magnet (IE5)
Shaft Seal Cartridge seal — rubber bellows / SiC-SiC faces / EPDM O-rings
Pipe Connection Combined DIN/ANSI/JIS flanges
Orientation Vertical
Important Notices
Electrical Requires correctly rated supply — 50 Hz. Install with correctly rated circuit protection and motor starter.
Temperature limits Do not exceed max fluid temperature (see spec sheet) or max ambient temperature (see spec sheet). Operating outside limits damages seals and motor insulation.
Dry running Do not run dry. Grundfos CR/CRN/MTR pumps use the pumped fluid to lubricate the shaft seal — dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, maintenance intervals, and spare part numbers. Manuals available from Grundfos or PumpStop.
Available Documentation
✓ Installation and Operating Manual (IOM) — Vertical Multistage Centrifugal Pump
✓ Product Data Sheet — CR3-17 A-FGJ-A-E-HQQE
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency are correct for your installation. For sizing, compatibility, or spare part guidance, chat or call (781) 281-8905.

Motor Curves

Recently viewed

Similar Products