Description
The AMT 3S9XHR is a 8 HP ipt trash pump 3" aluminum honda gx270. the closed impeller passages. Closed impellers are difficult to clean.
Engine-Driven — Operates Without Utility Power
Engine-driven design provides pumping capacity at remote construction sites, emergency dewatering locations, and any application where utility power is unavailable or unreliable. Honda and Robin/Subaru engines provide proven reliability.
Trash Pump Design — Handles Large Solids
Large volute clearances and semi-open impeller pass rocks, sticks, leaves, and semi-solids that would destroy a standard centrifugal pump. Designed for construction site dewatering where the pumped fluid contains significant debris.
Self-Priming — Fast Deployment
Self-priming capability allows rapid deployment without suction line preparation. Fill the priming chamber once and the pump primes itself — critical for emergency dewatering where every minute of setup time has operational cost.
Cast Iron Construction — Field Durability
Cast iron volute and impeller withstand the abuse of construction site operation. Designed to be serviceable in the field — standard replacement impellers, mechanical seals, and wear rings are stocked by AMT distributors.
High Volume Capability
Engine-driven trash pumps deliver high flow rates at low head — the correct performance curve for fast-fill, fast-drain, and high-volume dewatering applications where moving large volumes quickly is the priority.
Portable Design
Compact, portable design with lifting handle for single-person transport. Engine and pump are close-coupled on a single base — no alignment required after transport or repositioning on the job site.
| Model Number | 3S9XHR |
| Series | 3″-4″ IPT Trash Pumps |
| Category | Engine Driven and Diaphragm Pumps |
| Horsepower | 8 HP |
| Motor Frame | 145 |
| Seal Type | Viton/Silicon |
| List Price | $3,318.00 |
| Max Temperature | 180° F |
| Max Solids Handling | 2 |
| Max Fluid Temperature | 180° F |
| Max Solids Handling | 2 |
| Fluid compatibility | For use with non-flammable, non-abrasive liquids compatible with pump component materials. Verify chemical compatibility before use. |
| Seal compatibility | Always verify seal material compatibility with your specific fluid and chemical conditions. |
| Electrical | Requires a properly sized, grounded branch circuit. Do not use an extension cord. Protect motor with a properly sized thermal overload relay. |
| Temperature limit | Maximum fluid temperature 180° F. Exceeding this limit will damage seals and motor insulation. |