Description
The AMT 3930-95 ipt trash pump 2" npt briggs & stratton ohv. Self-primes to 20 Feet without a foot valve. These centrifugal pumps are engine-driven, self-priming (to 20 ft. lift) portable units, shipped completely assembled and mounted. Pumps include a clog resistant, open impeller capable of handling solids as large as 1" diameter for 2" NPT models (up
Engine-Driven — Operates Without Utility Power
Engine-driven design provides pumping capacity at remote construction sites, emergency dewatering locations, and any application where utility power is unavailable or unreliable. Honda and Robin/Subaru engines provide proven reliability.
Trash Pump Design — Handles Large Solids
Large volute clearances and semi-open impeller pass rocks, sticks, leaves, and semi-solids that would destroy a standard centrifugal pump. Designed for construction site dewatering where the pumped fluid contains significant debris.
Self-Priming — Fast Deployment
Self-priming capability allows rapid deployment without suction line preparation. Fill the priming chamber once and the pump primes itself — critical for emergency dewatering where every minute of setup time has operational cost.
Cast Iron Construction — Field Durability
Cast iron volute and impeller withstand the abuse of construction site operation. Designed to be serviceable in the field — standard replacement impellers, mechanical seals, and wear rings are stocked by AMT distributors.
High Volume Capability
Engine-driven trash pumps deliver high flow rates at low head — the correct performance curve for fast-fill, fast-drain, and high-volume dewatering applications where moving large volumes quickly is the priority.
Portable Design
Compact, portable design with lifting handle for single-person transport. Engine and pump are close-coupled on a single base — no alignment required after transport or repositioning on the job site.
| Model Number | 3930-95 |
| Series | 2″ Cast Iron Trash Pumps |
| Category | Engine Driven and Diaphragm Pumps |
| Max Temperature | 180° F |
| Max Solids Handling | 35 |
| Self-Prime Lift | 20 Feet |
| Self-Priming Lift | 20 Feet |
| Max Fluid Temperature | 180° F |
| Max Solids Handling | 35 |
| Model | HP | Type | Frame | Voltage | Phase | Casing | Seal | Weight | List Price |
|---|---|---|---|---|---|---|---|---|---|
| 3932-95 | 5 HP | 115 | Cast Iron | 1 |
★ Highlighted = this product (3930-95). All models share the same casing and spare parts. QSP = ships within 24 hours.
| Fluid compatibility | For use with non-flammable, non-abrasive liquids compatible with pump component materials. Verify chemical compatibility before use. |
| Seal compatibility | Always verify seal material compatibility with your specific fluid and chemical conditions. |
| Electrical | Requires a properly sized, grounded branch circuit. Do not use an extension cord. Protect motor with a properly sized thermal overload relay. |
| Temperature limit | Maximum fluid temperature 180° F. Exceeding this limit will damage seals and motor insulation. |