Liberty Motor XFL100, XFL150, Single Phase, 208/230 V (3483000)

This item ships free!
LibertySKU: 3483000

or Call for most up to date lead times. (781) 281-8905

Description

Liberty Pumps — A Family and Employee Owned Company · Bergen, New York · Since 1965
Model 3483000 · XFL100 · Explosion Proof / Hazardous Location
1 HP208/230VExplosion Proof / Hazardous LocationDrain Pumps3-Year Warranty

The Liberty Pumps 3483000 is a 1 HP, 208/230V, 1-Phase motor xfl100, xfl150, single phase, 208/230 v. The XFL-Series by Liberty Pumps are mid-range explosion-proof effluent pumps for hazardous locations. Built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners, the XFL-Series pumps will provide years of reliable performance.

Horsepower
1 HP
Voltage
208/230V
Discharge
2""
Solids Handling
3/4" dia.
UL Class I Div 1
UL listed for hazardous locations — safe for flammable vapors and gases
1 HP — Residential Grade
Thermal overload protection — motor automatically resets after cooling, preventing burnout
Authorized Dealer
PumpStop is an authorized Liberty Pumps distributor — full warranty coverage
Expert Support
Technical specialists available — call (781) 281-8905 or chat
Why This Product

UL Listed Class I Division 1

UL listed for Class I Division 1 hazardous locations where flammable gases or vapors are present continuously or intermittently under normal operating conditions.

Explosion-Proof Motor

Explosion-proof motor construction prevents internal sparks or arcs from igniting the surrounding flammable atmosphere — required for gasoline, chemical, and solvent storage areas.

CSA / UL Dual Listed

CSA and UL dual-listed for installation in both US and Canadian classified hazardous area installations without requiring separate equipment for each jurisdiction.

Cast Iron Construction

Heavy cast iron construction provides both the strength and thermal mass required for explosion-proof motor design — the thick walls contain any internal ignition before it can propagate to the surrounding atmosphere.

Continuous Duty Rated

Rated for continuous duty operation in hazardous locations — pumping sumps, floor drains, and collection pits in chemical plants, refineries, and fuel storage facilities.

Available Switch Configurations

Available with multiple switch types for automatic operation in hazardous location installations — vertical float, wide-angle float, and no-switch manual configurations.

Technical Specifications
Model Number 3483000
Series XFL100
Category Explosion Proof / Hazardous Location
Horsepower 1 HP
Voltage 208/230V
Phase 1-Phase
Discharge Size 2""
Solids Handling 3/4"
Key Features
Heavy cast iron construction
Dual shaft seals
Seal fail sensor
S emi-open cast iron impeller (bronze optional)
1 -1/2" Threads provided at power cords for optional conduit connection
S urface temperature code T4 For use with ISS-Series and ISD-Series intrinsically safe control panel
Important Notices
Electrical Requires a properly grounded GFCI receptacle meeting UL 943 requirements. Do not use an extension cord.
Fluid compatibility For use with clean water and gray water only. Not for use with chemicals, flammable fluids, grease, hydrocarbons, sand, cement, or abrasives.
Warranty 3-year Liberty Pumps limited warranty from date of purchase. Warranty voids for use with prohibited substances or field disassembly beyond normal maintenance.
Available Documentation
✓ Sales Literature / Product Brochure
✓ Installation Manual
✓ Engineering Specification Sheet
Need the installation manual, spec sheet, or product brochure? Contact PumpStop and we'll send it over.
Before You OrderConfirm voltage and switch type are correct for your installation. For sizing and compatibility guidance, chat or call (781) 281-8905.

You may also like

Recently viewed