AMT Pumps Centrifugal Pump 1-1/2" Cast Iron (282B-95)

This item ships free!
AMTSKU: 282B-95

Price:
Sale price$754.19
or Call for most up to date lead times. (781) 281-8905

Description

AMT Pump Company — A Gorman-Rupp Company · Royersford, PA
Model 282B-95 · 1-1/2″ Self Priming Centrifugal · Self-Priming Electric Pumps
2 HPTEFCUL/CSA ListedSelf-PrimingQSP — Quick Ship

The AMT 282B-95 is a 2 HP TEFC pumps centrifugal pump 1-1/2" cast iron. Self-primes to 20 Feet without a foot valve. Delivers up to 132 GPM. Self-Priming Centrifugal Pumps High Volume Dewatering Cast Iron Models

Horsepower
2 HP
Enclosure
TEFC
Voltage
230V
Weight
68 lbs
QSP — Quick Ship
Ships within 24 hours on standard configurations — no extended lead time
UL / CSA Listed
Listed for safe installation in US and Canadian electrical systems
NEMA 56J Frame
Standard NEMA frame — direct motor replacement with any off-the-shelf motor
Expert Support
Technical specialists available — call (781) 281-8905 or chat
Why This Product

Self-Priming to 20 Feet — No Foot Valve Required

Built-in check valve enables consistent self-priming to 20 feet of dry suction lift. No foot valve, no external priming pump, no manual flooding of suction line required. Re-primes automatically after momentary loss of prime.

Pull-From-Rear Design — Service Without Disturbing Piping

The pump casing pulls from the rear of the motor without disconnecting suction or discharge piping. Seal replacement, impeller inspection, and cleanout are all accessible from the motor face — significant labor savings on installed pumps.

TEFC Motor — Continuous Industrial Duty

Totally Enclosed Fan Cooled motor prevents moisture, dust, and contaminants from entering the windings. Rated for continuous duty. NEMA 56J frame allows direct replacement with standard off-the-shelf motors from any supplier.

Stainless Steel Motor Shaft — Corrosion-Resistant Seal Interface

303 stainless steel shaft at the seal interface prevents corrosion-driven seal failure — the most common failure mode in chemical transfer pumps. Cast iron shafts corrode at the seal face over time, eventually preventing proper mechanical seal contact.

Dual Volute Casing — Reduced Radial Bearing Load

Dual volute design balances hydraulic forces on the impeller radially. Single-volute designs create a net radial force that accelerates bearing and seal wear at off-BEP operating points. The dual volute extends service intervals on continuous duty applications.

Chemical Compatibility to Specific Gravity 1.3

EPDM/EPR seals handle dilute acids, alkalis, and water-treatment chemicals with specific gravities up to 1.3. The cast iron casing and seal selection make this pump suitable for chemical transfer where standard Buna-N construction would be inadequate.

Technical Specifications
Model Number 282B-95
Series 1-1/2″ Self Priming Centrifugal
Category Self-Priming Electric Pumps
Horsepower 2 HP
Motor Enclosure TEFC
Motor Frame 56J
Voltage 230V
Weight 68 lbs
List Price $1,193.00
Max Flow Rate 132 GPM
Max Head 100 Ft. (43 PSI)
Self-Prime Lift 20 Feet
Key Features
300 Series Investment Cast
Cast Iron Construction with
Optional Silicon Carbide
1-1/2˝ NPT Port Size
Maximum Temperature
Stainless Steel 200° F
Cast Iron 180° F
Maximum Flow 132 GPM
Maximum Head 100 Ft. (43 PSI)
Self-Priming up to 20 Feet with
Self-Cleaning, Clog Resistant
Solids Handling and Dirty
1/2 to 3 HP 56J Single or
300 Series Investment Cast Stainless Steel
Available in ODP or TEFC, Single or Three
QSP – Quick Ship Pump for Many Models
Cast Iron Construction with Buna-N Seals
Self-primes to 20 Ft.
Handles 3/8" Diameter Semi-solids
Self-cleaning, Clog Resistant Impeller
Performance Summary
Max Flow Rate 132 GPM
Max Head 100 Ft. (43 PSI)
Self-Priming Lift 20 Feet
All Models — 1-1/2″ Self Priming Centrifugal
Model HP Type Frame Voltage Phase Casing Seal Weight List Price
2827-95 1/2 HP ODP 56J 115 51 lbs 863.00
282D-95 3/4 HP TEFC 56J 115 52 lbs 985.00
282F-95 3/4 HP
2825-95 3/4 HP ODP 56J 115 55 lbs 907.00
282C-95 1 HP TEFC 56J 115 54 lbs 1,039.00
282K-95 1 HP TEFC 56J 230 60 lbs 1,060.00
282A-95 2 HP TEFC 56J 115 72 lbs 1,193.00
282B-95 2 HP TEFC 56J 230 68 lbs 1,193.00
2828-95 2 HP ODP 56J 115 67 lbs 1,124.00
282L-95 2 HP ODP 56J 230 71 lbs 1,124.00
282E-95 3 HP
282M-95 3 HP TEFC 56J 230 79 lbs 1,311.00
282D-98 3/4 HP TEFC 56J 115 52 lbs 2,042.00
282F-98 3/4 HP TEFC 56J 230 52 lbs 2,125.00
2825-98 3/4 HP ODP 56J 115 55 lbs 1,956.00
282C-98 1 HP TEFC 56J 115 54 lbs 2,086.00
282K-98 1 HP TEFC 56J 230 55 lbs
282A-98 2 HP TEFC 56J 115 72 lbs 2,280.00
282B-98 2 HP TEFC 56J 230 68 lbs 2,309.00
282L-98 2 HP ODP 56J 230 71 lbs 2,333.00
282E-98 3 HP TEFC 56J 230 82 lbs 2,437.00
282M-98 3 HP TEFC 56J 230 79 lbs 2,437.00

★ Highlighted = this product (282B-95). All models share the same casing and spare parts. QSP = ships within 24 hours.

Important Notices
Fluid compatibility For use with non-flammable, non-abrasive liquids compatible with pump component materials. Verify chemical compatibility before use.
Seal compatibility Always verify seal material compatibility with your specific fluid and chemical conditions.
Electrical Requires a properly sized, grounded branch circuit. Do not use an extension cord. Protect motor with a properly sized thermal overload relay.
Available Documentation
✓ Spec Sheet — 1-1/2″ Self Priming Centrifugal Series
✓ Repair Parts Manual — Specifications Information and Repair Parts Manual 2761-95 t
✓ Price Sheet — Current list pricing
Need the spec sheet, repair manual, or price sheet? Contact PumpStop and we'll send it over.
Before You OrderConfirm voltage, phase, and enclosure type are correct for your installation. All models in the 1-1/2″ Self Priming Centrifugal series share the same casing and impeller — only the motor configuration differs. For configuration guidance, chat or call (781) 281-8905. List pricing shown — contact PumpStop for distributor pricing.

Motor Curves

Recently viewed

Similar Products