Name: Barnes Blade Grinder Pump NGVHH15052 15 HP 575 V 3 Ph (141377N)
Brand: Barnes
SKU: 141377N
Price: 12286.5 USD
Availability: InStock

Image shown may not be actual product

Barnes Blade Grinder Pump NGVHH15052 15 HP 575 V 3 Ph (141377N)

Crane Pumps & Systems — Barnes Brand · Piqua, Ohio · Est. 1856

Model BLADE · Blade Grinder Pump · Barnes

15 HP2″ NPT or 2″, 2.5″, 3″ Horizontal / 2.5″, 3″ Horizontal DischargeUp to 105 gpm / 155 gpmUp to 160 ft / 242 ft Head3-7.5 / 10-15 HP Range

The Barnes BLADE is a 15 HP, 575V barnes blade grinder pump ngvhh15052 15 hp 575 v 3 ph (141377n). BLADE Grinder pumps are tailored for high head, high flow wastewater grinding in municipal, commerical, and light industrial settings. Available in 3HP to 15HP, standard and explosion proof models, with a 2″ NPT vertical discharge or a 2”/2.5”/3” horizontal sl Series capacity up to 105 gpm / 155 gpm at 160 ft / 242 ft head.

HP Range

3-7.5 / 10-15

Max Flow

105 gpm / 155 gpm

Max Head

160 ft / 242 ft

Discharge

2″ NPT or 2″, 2.5″, 3″ Horizontal / 2.5″, 3″ Horizontal

Speed

3450 / 3450

Voltage

575V

Grinder Technology

Stainless steel cutter macerates solids for low-pressure sewer service

Crane Pumps & Systems

A Crane Co. company — 165+ years of pump engineering. Barnes, Burks, Deming, and Weinman under one roof in Piqua, Ohio

Wide HP Range

3-7.5 / 10-15 HP available

Expert Support

Technical sizing and compatibility help — call (781) 281-8905 or chat

Why This Product

Grinder Mechanism — Macerates Solids Before Pumping

Stainless steel cutting ring and impeller macerate waste, wipes, and non-dispersible materials to a fine slurry before pumping — required for low-pressure sewer systems where raw sewage would block small-diameter discharge piping.

Low-Pressure Sewer Compatible

Designed to force slurry through small-diameter discharge piping uphill and over long horizontal runs — the correct pump type for below-grade plumbing where gravity connection to the municipal sewer is not possible.

Stainless Steel Cutting Components — Long Service Life

Stainless steel cutter components maintain sharp edges over extended service and resist corrosion from the sewage environment. Self-cleaning cutting action prevents material buildup on cutter surfaces.

Automatic Float Control

Float switch provides fully automatic operation — activates on rising basin level and deactivates when the basin empties. High-level alarm float provides early warning before overflow conditions develop.

Pre-Assembled Systems Available

Complete pre-assembled grinder packages available with basin, guide rails, and controls — one shipment, one installation, no component compatibility concerns.

Crane Pumps & Systems — SGV Industry Standard

Barnes and Deming grinder pumps are manufactured by Crane Pumps & Systems — one of the most recognized names in residential and municipal grinder pump applications.

Technical Specifications

Model Number	141377N
Series	Blade Grinder Pump
Brand	Barnes
Horsepower	15 HP
Voltage	575V
Series HP Range	3-7.5 / 10-15
Max Flow Rate	105 gpm / 155 gpm
Max Head	160 ft / 242 ft
Discharge Size	2″ NPT or 2″, 2.5″, 3″ Horizontal / 2.5″, 3″ Horizontal
Speed	3450 / 3450

Key Features

Barnes Slicerator ™ Radial Grinding Technology

Plug-n-Play “Quick Connect” Cord with Integral Temperature and Moisture Sensors

Oil Filled Motor

Explosion Proof Design – Class 1, Division 1, Groups C & D

Suitable for use with VFD

Class H Insulation System

Double Mechanical Seals

Oil Lubricated Bearings

Stainless Steel Lifting Bail and Hardware

Vortex Impeller

CSA Certified

Available Options

Impeller Trims To Meet Specified Conditions

Hard Face Seal Materials

Additional Cord Lengths

Guide Rail Systems and Leg Kit for Freestanding Applications Available

Typical Applications

Municipal

Commercial

Institutional

Light Industrial

Important Notices

Fluid compatibility	For use with liquids compatible with pump component materials. Verify chemical, temperature, and pressure compatibility before use.
Electrical	Requires a properly sized grounded branch circuit and motor starter with correctly rated thermal overload protection.
Operating limits	Do not exceed series pressure, temperature, and speed ratings. Operation outside rated limits causes premature seal and bearing failure.
Service	Disconnect and lockout/tagout power before any service. Allow pump to cool before handling after operation.

Available Documentation

✓ Product Specification Sheet — Blade Grinder Pump

✓ Installation, Operation & Maintenance Manual (IOM)

✓ Repair Parts Manual

Need the spec sheet, IOM, or parts list? Contact PumpStop and we'll send it over.

Before You OrderConfirm HP, voltage, phase, and enclosure type are correct for your installation. All models in the Blade Grinder Pump share casing dimensions and spare parts — motor configuration is the only difference between models. For sizing guidance, chat or call (781) 281-8905.

Barnes Blade Grinder Pump NGVHH15052 15 HP 575 V 3 Ph (141377N)

Description

Grinder Mechanism — Macerates Solids Before Pumping

Low-Pressure Sewer Compatible

Stainless Steel Cutting Components — Long Service Life

Automatic Float Control

Pre-Assembled Systems Available

Crane Pumps & Systems — SGV Industry Standard

Quote for 45220C0

Quote for 45480B0

Quote for 4508000

Quote for 23310AG

Quote for 8105000

Quote for 240600B

Quote for 206500B

Quote for 206500G

Quote for 240100G

Quote for 206500B

Quote for 2421200

Quote for 206500G

Quote for 2454000

Quote for 206500B

Quote for 2425200

Quote for 8082000

Quote for 8157000

Quote for 53250J0

Quote for 2421200

Quote for 8157000

Quote for 5045000

Quote for 2452000

Quote for 4405000

Quote for 4918000

Quote for 206500B

Quote for 8105000

Quote for 703/LEH102A

Quote for 702/LE72A

Quote for 702/LE102A

Quote for EV290HV-5BL

Quote for EV290-5BL

Quote for EV280HV-5BL

Quote for 45220C0

Quote for 45480B0

Quote for 4508000

Quote for 4405000

Quote for 8157000

Quote for 2454000

Quote for 1007-999-B0

Quote for 1434-006-90

Quote for 1560-000-02

Quote for 1557-000-00

Quote for 100547A

Quote for 100547B

Quote for 100547A

Quote for 100547B

Quote for 9-850835-04

Quote for 9-100834-04

Quote for 9-100835-04

Quote for 108344HF

Quote for 110981-KIT

Quote for 116429

Quote for 233HV

Quote for LNV100

Quote for LNV75

Quote for 4351000

Quote for K001314

Quote for K002080

Quote for 1007-999-B0

Quote for 1434-006-90

Quote for 1560-000-02

Quote for 96717383

Quote for 96717435

Quote for 91836569

Quote for 98562817

Quote for 96901187

Quote for 853344-X3

Quote for EV290HV-5BL

Quote for EV280HV-5BL

Quote for EV290-5BL

Quote for EV290HV-5BL

Quote for EV290-5BL