Description
The Barnes PUMP, 208/230 (1 and 3 phase), 460, 575 barnes pump repair part sh15054 (130770). The Barnes Solids Handling pump series is engineered for applications involving sewage, effluent, wastewater processing and solids laden media. Barnes SH pumps utilize oil-filled submersible motors and are available in both standard and explosion proof designs Series capacity up to 9000 GPM at 262 ft head.
Crane Pumps & Systems Engineering
Barnes, Burks, Deming, and Weinman pumps are manufactured by Crane Pumps & Systems in Piqua, Ohio — a Crane Co. company with 165+ years of pump engineering for commercial, industrial, and municipal applications.
Wide Performance Range
Multiple HP, voltage, and construction configurations cover your specific duty point. All models in the series share casing dimensions and spare parts — simplifying stocking and service.
Multiple Construction Options
Bronze fitted, all-bronze, all-iron, and specialty alloy configurations with multiple seal material options. Specify the combination matched to your fluid chemistry and service conditions.
Back Pull-Out Serviceability
Back pull-out pump design allows impeller, seal, and wear ring service without disconnecting suction or discharge piping — reducing field service time and cost on installed pumps.
NEMA-Frame Motors
Standard NEMA motor frame allows direct field motor replacement from any supplier — no custom parts, no factory service required when only the motor has failed.
National Service Network
Supported by a national network of authorized distributors and service centers with genuine Crane Pumps spare parts stocked for same-day or next-day availability.
| Model Number | 130770 |
| Series | Oil-Filled SH Solids Handling Pump |
| Brand | Barnes |
| Horsepower | 5-125 |
| Voltage | 208/230 (1 and 3 phase), 460, 575 |
| Series HP Range | 5-125 |
| Max Flow Rate | 9000 GPM |
| Max Head | 262 ft |
| Discharge Size | 3″-12″ |
| Speed | 850, 1150, 1750, 3450 |
| Fluid compatibility | For use with liquids compatible with pump component materials. Verify chemical, temperature, and pressure compatibility before use. |
| Electrical | Requires a properly sized grounded branch circuit and motor starter with correctly rated thermal overload protection. |
| Operating limits | Do not exceed series pressure, temperature, and speed ratings. Operation outside rated limits causes premature seal and bearing failure. |
| Service | Disconnect and lockout/tagout power before any service. Allow pump to cool before handling after operation. |
Motor Curves
Recently viewed
Similar Products
You'll Also Love...
















































































