Grundfos 99449295 - CRE 15-4 6-B-A-E-HQQE | Multistage | Centrifugal | Vertical | Inline

This item ships free!
GrundfosSKU: 99449295

Price:
Sale price$12,626.00
or Call for most up to date lead times. (781) 281-8905

Description

⚠ Discontinued Product This model has been discontinued by Grundfos. Stock may be limited. Contact PumpStop to confirm availability or discuss a replacement model.
Grundfos — World's Largest Pump Manufacturer · Bjerringbro, Denmark
CRE 15-4 6-B-A-E-HQQE · Vertical Multistage Centrifugal Pump — Variable Speed
CRE60 HzStainless steel

The Grundfos 99449295 (CRE 15-4 6-B-A-E-HQQE) is a Vertical Multistage Centrifugal Pump — Variable Speed. Cast iron head and base, stainless steel wetted parts, with integrated variable frequency drive and IE5-rated permanent magnet motor for energy-optimized pressure control.

Frequency
60 Hz
Max Pressure
145.04psi
Max Fluid Temp
248°F
Grundfos
World's largest pump manufacturer — engineering and manufacturing in 17 countries since 1945
Industrial Grade
Built and tested to IEC and NEMA standards
Authorized Distributor
Genuine Grundfos product — full manufacturer warranty coverage
Expert Support
Technical help available — call (781) 281-8905 or chat
Why This Product

Integrated Variable Frequency Drive

The VFD is built into the pump head — no external drive cabinet, no panel wiring, no drive-to-motor cable. Reduces panel space, installation cost, and failure points.

IE5 Permanent Magnet Motor

CRE uses a Grundfos MGE permanent magnet motor rated IE5 — the highest commercially available efficiency class. Significant energy reduction vs IE3 motors at partial load.

Proportional Pressure Control

AUTOADAPT automatically adjusts set point based on actual system demand. No manual curve adjustment needed after commissioning.

iSOLUTIONS Ready

CRE supports Grundfos GO app, CIM communication modules (PROFIBUS, MODBUS, BACnet), and remote monitoring. Full integration into building management systems.

Soft Start Built In

The integrated drive provides controlled ramp-up, eliminating water hammer and reducing mechanical stress on seals and couplings at every start.

Pump Protection Built In

Dry-run protection, over-temperature shutdown, and motor current monitoring are standard in every CRE. No external protection relay required.

Model Information — CRE 15-4 6-B-A-E-HQQE
Series: CRE
Model Code: CRE 15-4 6-B-A-E-HQQE
Seal Type: Cartridge seal — H rubber bellows, QQ SiC/SiC faces, E EPDM O-ring
Impeller Material: Stainless steel
Shaft Seal: HQQE
Technical Specifications
Model Number 99449295
Product Series CRE
Series Description Vertical Multistage Centrifugal Pump — Variable Speed
Frequency 60 Hz
Pump Speed 3461rpm
Max Operating Pressure 145.04psi
Max Fluid Temperature 248°F
Pipe Standard Oval / NPT(F)
Impeller Material Stainless steel
Shaft Seal HQQE
Approvals / Certifications CE
Important Notices
Electrical Verify supply voltage, phase, and frequency match nameplate before installation.
Temperature limits Do not exceed max fluid temperature 248°F. Exceeding limits damages seals and motor insulation.
Dry running Do not run dry. CRE pumps use the pumped fluid to lubricate the shaft seal. Dry running destroys the seal within seconds. Install dry-run protection on all automatic installations.
Maintenance Refer to the Grundfos Installation and Operating Manual (IOM) for correct installation, commissioning, and maintenance. Contact PumpStop for documentation.
Documentation
✓ Installation and Operating Manual (IOM) — CRE Series
✓ Product Data Sheet — CRE 15-4 6-B-A-E-HQQE
✓ Service Manual and Spare Parts List
Need the IOM, data sheet, or spare parts list? Contact PumpStop and we'll send it over.
Before You OrderConfirm model code, voltage, phase, and frequency match your installation. For sizing help, spare parts, or documentation, call (781) 281-8905 or chat with PumpStop.
EAN 5713829303751
Actual impeller diameter 4.13 in
Density 62.29 lb/ft³
Diameter 4.13 in
Gross weight 194.0 lb
Liquid temperature range -4 .. 248 °F
Material Pricing Group 31
Max pressure at stated temp 145 psi / 250 °F
Max. capacity 2 ,
Net weight 191.0 lb
Real Time Delivery date to be confirmed on Sales Order  Update with real time availability and Net price
Selected liquid temperature 68 °F

Motor Curves

Dimensional Drawing

Recently viewed

Similar Products